Facebook Pixel

Robertshaw 710-501 Millivolt Gas Valve ,1/2 Inch ,Non- Regulator

Special Price $151.24 Regular Price $173.93
In stock
SKU
710-501

The Robertshaw 710-501 Millivolt Gas Valve is an essential component in heating systems, especially in HVAC equipment. This non-regulator 1/2-inch valve is essential for managing gas flow in millivolt systems, which run without external power supplies. It uses the thermocouple technique to use the heat from the pilot flame to generate a small electrical signal that allows it to open and close the gas flow as needed. Furnaces, boilers, and water heaters are just a few of the gas-powered appliances that this valve works with. It ensures consistent warmth and comfort for consumers while optimizing energy efficiency and safety. It also promises stable and efficient performance.

Manufacturer:
https://www.partshnc.com/media/catalog/product/7/1/710-501.jpg
Manufacturer Name: Robertshaw
Product Number: 710-501
OEM Part Number: 710-501
Product Description: Millivolt Gas Vlv,1/2",Non-Reg
Weight:1.86lbs/843.68g

Choose the best HVAC equipment parts and supplies from PartsHnC!

  • Same Day Shipping

  • Best Quality And Best Price

  • Wide Range of Inventory

  • Best Customer Service

Have More Questions or Need Help to Place The Order?
Reach us at (866)773-0907 or [email protected]

Write Your Own Review
You're reviewing:Robertshaw 710-501 Millivolt Gas Valve ,1/2 Inch ,Non- Regulator
Your Rating
Customer Questions
What maintenance is required for the Robertshaw 710-501 Millivolt Gas Valve?

Regularly inspect the valve for gas leaks, corrosion, or debris around the inlet and outlet connections. Ensure wiring and millivolt connections remain secure and clean. Keep the surrounding area free from dust and moisture. Always shut off the gas supply before performing inspections.

What are common issues with the Robertshaw 710-501 Millivolt Gas Valve?

  • Gas flow failing to start or stop properly.
  • Weak or inconsistent millivolt signal response.
  • Internal valve sticking during operation.
  • Gas leakage from connection points.

Installation Steps

Step 1: Turn off gas supply and disconnect power completely.

Step 2: Remove old valve carefully using proper tools.

Step 3: Clean pipe threads and apply gas-rated thread sealant.

Step 4: Install new valve, aligning flow direction correctly.

Step 5: Tighten fittings securely without over-torquing.

Step 6: Reconnect pilot, thermocouple, and gas lines.

Step 7: Turn gas on, check for leaks using soapy water, and test operation safely.