Facebook Pixel
Taco Valves

Taco Valves

Taco is a company that manufactures and distributes a wide range of valves for HVAC and plumbing systems. Taco valves are used to control the flow of water, steam, or other fluids in heating, cooling, and other systems. Some of the types of valves that Taco offers include:

  • Zone valves: These valves are used to control the flow of water or steam in individual zones or rooms in a building.
  • Circulator valves: These types of valves are used to control the flow of water in a closed-loop system, such as a hydronic heating system.
  • Check valves: To stop water from flowing in the other direction, these valves are utilized.
  • Ball valves: Balls valves are used to control the flow of water or other fluids and are often used in isolation or shut-off applications.
  • Pressure Reducing Valve: Taco Pressure Reducing Valves are used to reduce the pressure of incoming water or steam to a safe and consistent level, protecting the system and its components from damage caused by excessive pressure. Pressure-reducing valves are commonly used in commercial and industrial applications, such as in large buildings, hotels, hospitals, and other large-scale facilities where pressure control is crucial.

Taco valves are known for their high-quality construction, durability, and reliability. Its products are used in many HVAC and plumbing systems, including residential, commercial, and industrial applications. PartsHnC offers a wide range of Taco valves and other manufacturers' HVAC parts with same-day shipping.

FAQs

Why would a taco valve be used?

A zone control valve for hydronic heating and/or cooling systems, the Taco Heat Motor Zone Valve is electrically powered. Under the room or zone thermostat, it regulates the flow of water in that area.

What steps must be taken to adjust the Taco fill valve?

The procedure for adjusting the Taco fill valve will depend on the specific model of the valve that you have. However, you can follow these steps to adjust the fill valve:

  • Turn off the water supply to the valve by closing the main shut-off valve or the shut-off valve for the specific line that the fill valve is connected to.
  • Locate the change screw or knob on the valve. This is usually on the top or side of the valve housing.
  • Use a flathead screwdriver or a hex wrench to turn the change screw or knob clockwise to raise the water level, or counterclockwise to lower the water level.
  • Open the valve's water supply and let it fill the tank.
  • Check the water level in the tank and adjust the valve as necessary to achieve the desired water level.
  • In order to check for leaks once the valve has been adjusted, switch off the water supply to the valve.

Taco Manufacturers Other Categotries

Taco Parts Taco Pump Parts Taco Heat Exchangers

 

View as Grid List

12 Items

2 3 4 5
per page
Set Descending Direction
View as Grid List

12 Items

2 3 4 5
per page
Set Descending Direction