Air-conditioning systems use compressors to maintain refrigerant movement through the cooling circuit. The Amana-Goodman 44A202AS is a compressor used in HVAC equipment to provide the pressure needed for refrigerants to continue through the refrigeration process. By compressing refrigerant vapor, it supports the operating conditions required by the connected cooling system. The compressor serves as a central component in equipment designed around its electrical and refrigerant requirements.
COMPRESSOR OPERATION AND PRESSURE GENERATION:
The compressor receives low-pressure refrigerant vapor from the evaporator side of the system and compresses it before discharge. This process increases vapor pressure and creates the pressure difference needed for refrigerant movement through the circuit. The compressed refrigerant then proceeds toward the condenser, where heat is released before the refrigerant continues through the remaining stages of the cycle.
ELECTRICAL OPERATION AND REFRIGERANT APPLICATION:
The compressor's internal motor converts electrical input into the mechanical action required for compression. The Amana-Goodman 44A202AS is listed for 208/230V, single-phase operation, while R410A is the specified refrigerant. Both the electrical supply and refrigerant must correspond with the requirements of the equipment.
REPLACEMENT GUIDELINES:
Replacement of the 44A202AS may be necessary when testing confirms compressor failure or when the compressor can no longer support the required cooling operation. It may also be necessary when the existing component is identified for replacement through the equipment's service information. Before ordering, compare the original part number with the applicable equipment documentation and confirm the required compressor specifications.
COMMON SIGNS OF FAILURE:
- The compressor fails to start during an operating cycle.
- Cooling becomes insufficient despite continued system operation.
- The compressor repeatedly starts and stops. Electrical protection trips during compressor operation.
- The compressor operates but does not maintain the required temperature.
EQUIPMENT COMPATIBILITY:
The Amana-Goodman 44A202AS should be matched to HVAC equipment that identifies this compressor as the applicable component. Fitment depends on the equipment's documented compressor requirements and system design. Before purchasing, compare the equipment model and existing compressor identification with the applicable parts documentation to confirm the correct component.
TECHNICAL SPECIFICATIONS:
Product Identification:
Brand: Amana-Goodman
Part Number: 44A202AS
Product Type: Compressor
Electrical Specifications:
Voltage: 208/230V
Phase: 1-Phase
Refrigeration Specifications:
Refrigerant: R410A
Loyalty Program
