Facebook Pixel

Aaon R83541 1/2 Inch 24V Gas Valve

Special Price $275.37 Regular Price $305.66
In stock
SKU
R83541

The Aaon R83541 is a critical component in gas-powered HVAC systems, ensuring accurate control of natural gas flow for maximum heating efficiency. The gatekeeper methodically regulates the flow of gas into the burner. This tiny 1/2-inch valve runs efficiently on 24 volts and is made of robust brass for long-term durability. The R83541 is compatible with a variety of Aaon furnaces and boilers and includes extensive control functions. It adjusts gas flow based on heating demand, resulting in higher combustion efficiency and potentially lower energy expenditures. Furthermore, its consistent performance and compliance with industry standards ensure security Upgrading to the Aaon R83541 has various advantages. First, its precise control over gas flow can increase combustion efficiency, reducing fuel use and thus lowering your energy cost.

Manufacturer:
https://www.partshnc.com/media/catalog/product/r/8/r83541.jpg
Manufacturer Name: Aaon
Product Number: R83541
OEM Part Number: R83541
Product Description: 1/2" 24V Gas Valve
Weight:1.84lbs/834.61g

Choose the best HVAC equipment parts and supplies from PartsHnC!

  • Same Day Shipping

  • Best Quality And Best Price

  • Wide Range of Inventory

  • Best Customer Service

Have More Questions or Need Help to Place The Order?
Reach us at (866)773-0907 or [email protected]

Write Your Own Review
You're reviewing:Aaon R83541 1/2 Inch 24V Gas Valve
Your Rating
Customer Questions
What maintenance is required for the Aaon R83541 Gas Valve?

The gas valve should be inspected regularly for debris buildup and secure electrical connections. Ensure proper voltage supply and clean valve components to maintain smooth operation. Periodic testing can prevent unsafe gas flow issues.

What are common issues with the Aaon R83541 Gas Valve?

  • Failure to open due to coil failure.
  • Gas leakage from worn seals.
  • Sticking or delayed valve response.
  • Inconsistent flame or ignition issues.
  • Electrical coil not energizing properly.
  • Intermittent gas flow during operation.

Installation Steps

Step 1: Disconnect electrical power and shut off the gas supply to the unit before servicing.

Step 2: Remove the access panel to reach the existing gas valve assembly.

Step 3: Label and disconnect all electrical connectors and gas line fittings from the old valve.

Step 4: Carefully remove the mounting screws and detach the faulty gas valve from the gas train.

Step 5: Install the new valve in the same orientation and reconnect gas lines using approved sealant.

Step 6: Reconnect wiring, restore gas and power, then leak-test all joints and verify safe burner ignition and operation.