Product overview:
It provides a practical way to regulate HVAC equipment when conventional wiring between the thermostat location and equipment is difficult to install. The Peco Controls T360-3 Wave PRO is a non-programmable wireless thermostat system supplied with a separate remote receiver for designated fan coil, PTAC, heat pump, and conventional heating and cooling applications. The thermostat sends temperature control commands wirelessly to the receiver installed near the HVAC equipment. This OEM control system supports convenient wall placement and simplifies thermostat installation in retrofit and light commercial environments.
Wireless communication:
Wireless communication allows the thermostat to send operating commands to the remote receiver without a direct control cable between the two locations. The thermostat monitors room temperature and processes user-selected settings, while the receiver connects to the HVAC equipment and carries out the requested heating or cooling operation.
Fan Control:
Heating and cooling settings allow users to select the desired operating mode and adjust room temperature. The control system provides Heat, Cool, and Off modes, along with Low, Auto, and High fan selections. Adjustable temperature swing settings help regulate equipment cycling according to the selected temperature setting and connected HVAC configuration.
Replacement guidelines:
Replace the Peco Controls T360-3 thermostat or receiver when the display stops responding, wireless communication is interrupted, or the HVAC equipment no longer responds correctly to thermostat commands. Before replacement, inspect the power supply, receiver wiring, battery condition, and wireless pairing. Confirm the existing equipment configuration and verify that the replacement includes the required remote receiver.
Common Failure Symptoms:
- Thermostat display becomes blank or unresponsive.
- Heating or cooling does not respond to temperature adjustments.
- Wireless commands fail to reach the receiver.
- Fan-speed settings do not operate as expected.
- Receiver fails to activate the connected HVAC equipment.
- Room temperature differs from the displayed setting.
Equipment compatibility:
The T360-3 Wave PRO is an OEM replacement option for designated fan coil, PTAC, heat pump, and conventional HVAC applications. It supports specified single-stage heating and cooling configurations and designated heat pump systems with electric auxiliary heat.
Technical Specifications:
Brand: Peco Controls
Model: T360-3
Product Series: Wave PRO
Product Type: Wireless Thermostat with Remote Receiver
Loyalty Program



