Facebook Pixel

Johnson Controls P499RCPS100K Pressure Transduce 10-100 PSI 1/4"

Special Price $227.24 Regular Price $252.24
In stock
SKU
P499RCPS100K
The Johnson Controls P499RCPS100K Pressure Transducer is a high precision product that is used to monitor pressure in HVAC systems. Its power supply from a 15-30 VDC source and has a current of 0.2 kW to guarantee optimal and steady performance. The transducer uses gauge pressure to measure relative pressure to atmospheric conditions, which is essential information for system control. It is designed for direct mount with integral pressure connection that makes it easier to install on numerous HVAC applications including chillers, boilers, and air handling units and units where there is need to take precise pressure measurements to keep an equipment performing optimally.
Manufacturer:
https://www.partshnc.com/media/catalog/product/p/4/p499rcps100k_johnson-controls_partshnc.jpg

Specifications

  • Temperature Range: -45°F to 185°F
  • Type: Pressure Transducer
  • Current
  • 0.2 kW
  • Pressure Range: 10 to 100 PSI
  • Voltage: 15-30 VDC
  • Pressure Type: Gauge pressure
  • Mounting Type: Direct Mount
  • Material: Metal
  • Material: Stainless steel
  • Weight: 0.47 Lbs
Manufacturer Name: Johnson Controls
Product Number: P499RCPS100K
OEM Part Number: P499RCPS100K
Product Description: -10-100# 1/4" Press.Transducer
Weight:0.47lbs/213.19g

Choose the best HVAC equipment parts and supplies from PartsHnC!

  • Same Day Shipping

  • Best Quality And Best Price

  • Wide Range of Inventory

  • Best Customer Service

Have More Questions or Need Help to Place The Order?
Reach us at (866)773-0907 or [email protected]

Write Your Own Review
You're reviewing:Johnson Controls P499RCPS100K Pressure Transduce 10-100 PSI 1/4"
Your Rating
Customer Questions
What maintenance is required for the Johnson Controls P499RCPS100K Pressure Transducer?

Keep the pressure port clean and free of debris to ensure accurate readings. Periodically calibrate the transducer and inspect wiring connections for corrosion or looseness. Avoid exceeding rated pressure and protect from moisture and vibration during operation.

What are common issues with the Johnson Controls P499RCPS100K Pressure Transducer?

  • Signal drift causing inaccurate pressure readings.
  • No output due to wiring or power failure.
  • Erratic readings from electrical noise or interference.
  • Pressure port clogging or diaphragm damage affecting response.
  • Incorrect calibration offset causing steady measurement error.

Installation Steps

Step 1: Turn off power and isolate the HVAC system to relieve pressure safely.

Step 2: Locate the existing transducer and disconnect electrical wiring carefully.

Step 3: Remove the old unit from the pressure port fitting.

Step 4: Install the new transducer using proper thread sealant.

Step 5: Reconnect wiring to the correct signal and power terminals .

Step 6: Restore system power and pressure, then check output signal and calibration.