Facebook Pixel

Aaon R78310 1/4 HP Combustion Blower Motor Assembly 3400 RPM 230V

Special Price $1,154.38 Regular Price $1,281.36
In stock
SKU
R78310

The Aaon R78310 is a combustion assembly with a 1/4 horsepower motor, 230V voltage rating, and a quick rotation speed of 3400 RPM. This part is intended exclusively for incorporation into HVAC systems, where combustion processes are essential. As a component of the combustion assembly, this motor powers crucial parts that enable fuel to burn efficiently and provide the best possible heat generation for the HVAC system. To power the combustion-related components, it converts electrical energy into mechanical energy. which powers the components required for combustion. Supporting the total heating functioning, the Aaon R78310 helps HVAC equipment operate with dependability and efficiency. 

 

https://www.partshnc.com/media/catalog/product/r/7/r78310.jpg
Manufacturer Name: Aaon
Product Number: R78310
OEM Part Number: R78310
Product Description: 1/4Hp 230V 3400Rpm Comb Assy
Weight:18.6lbs/8436.81g

Choose the best HVAC equipment parts and supplies from PartsHnC!

  • Same Day Shipping

  • Best Quality And Best Price

  • Wide Range of Inventory

  • Best Customer Service

Have More Questions or Need Help to Place The Order?
Reach us at (866)773-0907 or [email protected]

Write Your Own Review
You're reviewing:Aaon R78310 1/4 HP Combustion Blower Motor Assembly 3400 RPM 230V
Your Rating
Customer Questions
What maintenance is required for the Aaon R78310 Combustion Blower Motor Assembly?

Inspect and clean the blower wheel and motor housing regularly to prevent dust buildup and airflow restriction. Check electrical connections for tightness and signs of overheating. Lubricate bearings if applicable and ensure proper mounting alignment for smooth operation.

What are common issues with the Aaon R78310 Combustion Blower Motor Assembly?

  • Motor overheating under heavy load or restricted airflow.
  • Reduced blower speed due to worn bearings or dust accumulation.
  • Electrical failure from capacitor issues or loose wiring.
  • Excessive vibration or noise from imbalance or mounting wear.

Installation Steps

Step 1: Turn off power and gas supply; apply lockout/tagout and confirm no voltage.

Step 2: Remove access panel and disconnect wiring harness.

Step 3: Unbolt and remove old blower motor assembly.

Step 4: Install new unit, align mounting points, secure bolts tightly.

Step 5: Reconnect wiring per diagram and reassemble the panel.

Step 6: Restore power and test operation, checking airflow and noise.