nternational Comfort Products 1171315 Inducer Motor Assembly 460V
Specifications
- Type: Inducer Motor Assembly
- Voltage: 460V
Loyalty ProgramGas furnaces and packaged heating units use inducer assemblies to move combustion gases toward the exhaust pathway. The International Comfort Products 1171315 is an inducer motor assembly specified for 460V operation in designated equipment applications. It provides the rotational drive required by the inducer mechanism.
Motor-Driven Inducer Operation:
The motor converts electrical energy into mechanical rotation. This movement drives the connected inducer mechanism, enabling it to move combustion gases through the exhaust system.
Role in Combustion Exhaust:
The inducer mechanism moves flue gases away from the combustion area and toward the designated exhaust outlet. This supports the intended flow of combustion gases through the heating equipment.
Replacement Guidelines:
Replacement may be appropriate when a confirmed fault or physical damage prevents the assembly from providing the required mechanical movement. Before ordering, compare the existing part number and required assembly configuration with the verified replacement specifications.
Common Failure Symptoms:
Equipment Compatibility:
The International Comfort Products 1171315 is associated with specified packaged-unit applications, including the supplied PGE-series model numbers PGE060LMA00AAA, PGE072L150AA, PGE048S115AA, and PGE090LEA00AAA. These models have been provided for compatibility checking, but their compatibility with this assembly has not been independently confirmed; verify the exact equipment model and required part number before purchasing.
Technical Specifications:
Product Identification:
Brand: International Comfort Products
Part Number: 1171315
Product Type: Inducer Motor Assembly
Electrical:
Voltage: 460V
Step1: Turn off power to the equipment before starting.
Step2: Remove the furnace access panel to access the old inducer motor.
Step3: Disconnect electrical wiring and remove mounting screws from the old motor.
Step4: Carefully detach the old inducer motor assembly.
Step5: Position the new motor assembly and secure it with screws.
Step6: Reconnect electrical wiring and ensure all connections are tight.
Step7: Replace the access panel, restore power, and test the furnace for proper operation.