Step 1: Shut off gas supply and power to water heater; allow cooling.
Step 2: Label and disconnect thermocouple, gas line, and burner connections.
Step 3: Remove old control valve and clean pipe threads thoroughly.
Step 4: Install new valve securely, ensuring correct orientation and sealing.
Step 5: Reconnect gas line and thermocouple per manufacturer diagram.
Step 6: Restore gas supply and check all joints for leaks with soap solution.
Step 7: Light pilot, test burner operation, and check proper temperature control.
Step 8: Ensure adequate ventilation and never use open flame for leak testing.