Facebook Pixel

Superior Radiant VH005 VS Electrode Gasket

Special Price $23.80 Regular Price $30.94
Out of stock
SKU
VH005
The Superior Radiant VH005 VS Electrode Gasket is a sealing material that is utilized to provide a close fit between an electrode and its mounting surface in combustion equipment. It is a fine-fitting gasket to support the prevention of any air or gas escape and the stable location of the sensor assembly. The gasket is effective, as it presses slightly when it is placed to provide a valid seal around the port. It is applied in furnaces, heaters, and gas-fired HVAC systems to assist in proper ignition and flame detection by keeping a steady position of the system.
https://www.partshnc.com/media/catalog/product/v/h/vh005.jpg
Manufacturer Name: Superior Radiant
Product Number: VH005
OEM Part Number: VH005
Product Description: Vs Electrode Gasket
Weight:0.01lbs/4.54g

Choose the best HVAC equipment parts and supplies from PartsHnC!

  • Same Day Shipping

  • Best Quality And Best Price

  • Wide Range of Inventory

  • Best Customer Service

Have More Questions or Need Help to Place The Order?
Reach us at (866)773-0907 or [email protected]

Write Your Own Review
You're reviewing:Superior Radiant VH005 VS Electrode Gasket
Your Rating
Customer Questions
What maintenance is required for the Superior Radiant VH005 Electrode Gasket?

Perform routine inspection of electrodes and gasket surfaces for corrosion, debris, or wear. Clean contacts gently with approved non-abrasive tools to ensure proper conductivity and sealing. Check fasteners and seals regularly for safe, efficient operation.

What are common issues with the Superior Radiant VH005 Electrode Gasket?

  • Electrode wear leading to ignition failure or inconsistent performance.
  • Gasket leakage causing pressure drops and reduced sealing efficiency.
  • Corrosion buildup resulting in intermittent operation or electrical instability.
  • Misalignment causing improper fit and operational faults.

Installation Steps

Step 1: Turn off power and gas supply; allow the unit to cool fully.

Step 2: Access the burner assembly and remove the electrode mounting screws.

Step 3: Carefully detach the old gasket from the electrode assembly surface.

Step 4: Clean the mounting area to ensure a smooth, debris-free sealing surface.

Step 5: Position the new gasket and reinstall the electrode assembly evenly.

Step 6: Tighten screws securely, restore power/gas, and check safe ignition and flame sensing operation.