Facebook Pixel
Sign-Up Bonus
Get 500 Reward Points instantly when you join.
Redeem Instantly
50 points = $1 off at checkout.
Earn as You Shop
$1 spent = 1 point every time you order.
Member Perks
Unlock exclusive member-only savings and offers.

Register and Earn 500 Reward Points
Toggle Nav
Search
Toggle Nav
Join Our Loyalty Program
main product photo

Trane MOT20276 3/4HP Variable Speed Motor 1250 RPM

Be the first to review this product
Special Price $1,550.75 Regular Price $1,721.34
In stock
SKU
MOT20276
The Trane MOT20276 3/4HP Variable Speed-Motor is used to supply airflow depending on the HVAC systems. It operates at 115V or 208/230V single-phase power and can be easily connected to standard residential or commercial power. It is designed to have a variable speed controller which adjusts the speed of the blower to suit system requirements for temperature regulation and conditioned air distribution. It is applied in air handlers furnaces and packaged units where the circulation needs to be controlled at 1250 RPM.
Add to Wish List
Motors & Capacitors, Motors & Components
Manufacturer:
https://www.partshnc.com/media/catalog/product/m/o/mot20276.jpg

Specifications

  • Type: Variable Speed Motor
  • Horsepower: 3/4HP
  • Speed: 1250 RPM
Write Your Own Review
You're reviewing:Trane MOT20276 3/4HP Variable Speed Motor 1250 RPM
Your Rating
Product Questions (2)
Customer Questions
What maintenance is required for the Trane MOT20276 Motor?

Regularly inspect the motor for dust, dirt, and debris that could affect performance. Check and lubricate bearings if applicable, and ensure electrical connections are tight. Verify mounting and alignment to prevent vibration. Always disconnect power before servicing for safety.

What are common issues with the Trane MOT20276 Motor?

  • Motor not reaching full speed or fluctuating.
  • Unusual humming or buzzing noises.
  • Overheating during operation.
  • Irregular rotation or stalling.

Installation Steps

Step 1: Turn off power to the system to prevent electrical shock.

Step 2: Remove the old motor by disconnecting wiring and loosening mounting screws.

Step 3: Securely mount the new motor using existing brackets or screws.

Step 4: Reconnect wiring according to the motor’s label or system diagram.

Step 5: Check belt or shaft alignment and adjust if necessary.

Step 6: Restore power and test motor operation at variable speeds.