Facebook Pixel
Sign-Up Bonus
Get 500 Reward Points instantly when you join.
Redeem Instantly
50 points = $1 off at checkout.
Earn as You Shop
$1 spent = 1 point every time you order.
Member Perks
Unlock exclusive member-only savings and offers.

Register and Earn 500 Reward Points
Toggle Nav
Search
Toggle Nav
Join Our Loyalty Program
main product photo

Trane BLW01369 1/44-1/39HP Inducer Blower 3345 RPM 208-230V/1PH 60Hz

Be the first to review this product
Special Price $193.97 Regular Price $273.95
Out of stock
SKU
BLW01369
The Trane BLW01369 Inducer Blower is a combustion airflow part that directs exhaust gases through the heating section when in operation. It has a motor-driven blower with the rating of 1/44-1/39 horsepower and operates at 3345 RPM and 60 Hz frequency and 208-230 volt single-phase power to provide the draft needed to adequately ventilate gas furnaces and packaged HVAC systems. The assembly is attached in the inducer housing and is linked to the control circuit which turns it on in the heating sequence. Constant draft conditions help to maintain steady ignition, assist in eliminating combustion gases.
Add to Wish List
Motors & Capacitors, Blower Motors & Components
Manufacturer:
https://www.partshnc.com/media/catalog/product/b/l/blw01369.jpg
Write Your Own Review
You're reviewing:Trane BLW01369 1/44-1/39HP Inducer Blower 3345 RPM 208-230V/1PH 60Hz
Your Rating
Product Questions (2)
Customer Questions
What maintenance is required for the Trane BLW01369 Inducer Blower?

Regularly clean the blower wheel and housing to remove dust and debris. Inspect motor mounts and electrical connections for tightness. Lubricate bearings if applicable, and ensure proper airflow to prevent overheating or vibration issues.

What are common issues with the Trane BLW01369 Inducer Blower?

  • Motor overheating or failure.
  • Excessive vibration or noise.
  • Reduced airflow due to dust buildup.
  • Electrical connection problems causing intermittent operation.

Installation Steps

Step 1: Turn off all power at the main breaker to ensure safety.

Step 2: Remove the HVAC access panel to reach the inducer assembly.

Step 3: Carefully disconnect the old inducer blower from the motor and wiring.

Step 4: Slide or mount the new inducer blower in the same position.

Step 5: Reconnect all wiring securely, ensuring proper alignment.

Step 6: Replace the access panel, restore power, and test for correct operation.