The Trane BAYABRD001C Defrost Control Board Kit is an accessory to replace Defrost Control Board for your Trane heating and cooling system. This cycle is essentialin order to avoid the icing of the evaporator coil since it will not allow adequate airflow over the coil. The defrost control board is similar to a thermostat but is geared toward the evaporator coil. It also regulates the temperature of the coil and automatically sets a defrost cycle when it perceives that the coil is covered with frost. During defrosting the heater coils in the unit come on to melt the ice formed inside the consol unit. Once the coil is safe that is above the freezing point, defrosting cycle is complete and the system goes back into normal mode. This defrost control board kit is designed for Trane packaged units from 3 to 10 tons with existing controls on them.
How to install an expansion valve for refrigeration?
Thermostatic expansion valves are an integral part of your refrigeration unit. They are responsible for ensuring the right dosage of refrigerant is entering the cooling coil to ensure maximum efficiency in the air conditioning of the system.
These special expansion valves come with a temperature sensor that is mounted at the end of the evaporator coil. They incorporate signals from this sensor to maintain the required temperature of the HVAC system. The thermostatic expansion valve works like a precision device that can regulate the measurements of the liquid refrigerant that flows into the evaporator of your system. This regulation in the flow of the refrigerant is essential to prevent the reverse flow of the refrigerant into the compressor of your system.
Through this mechanism, the thermostatic expansion valve successfully separates the high and low pressure sides of the refrigeration/air conditioning system. The liquid refrigerant enters the expansion ...
Please, mind that only logged in users can submit questions