Facebook Pixel

York S1-025-32650-000 Temperature Control 280°F Open/250°F Close

Special Price $84.52 Regular Price $97.20
Out of stock
SKU
S1-025-32650-000
The York S1-025-32650-000 Temperature Control is a component that is manufactured with high accuracy for controlling temperature in HVAC systems. It works as a thermostat, making the circuit off at 250°F and on at 280°F to maintain the system’s safe temperature. This is essentialin avoiding overheating and hence safeguarding your HVAC equipment. It is widely employed in commercial and residential heating systems, where the control of the temperature is essential. The product is most useful for furnaces and heat pumps since those devices require constant temperature control to operate efficiently and save energy.
https://www.partshnc.com/media/catalog/product/s/1/s1-025-32650-000.jpg

Specifications

  • Type: Temperature Control
  • Switch Closes: 250°F
  • Switch Opens: 280°F
  • Length: 3.55"
  • Width: 2.25"

Product Overview:
High-temperature monitoring and automatic switching in compatible HVAC equipment are supported by the York S1-025-32650-000 Temperature Control. Designed with a 280°F open and 250°F close switching configuration, this temperature control responds to rising and falling temperatures through its specified contact operation. It serves as a replacement control component for equipment requiring these temperature switching points, helping maintain the intended temperature-control sequence.

Temperature Sensing:
Responds to temperature changes through a temperature-sensitive switching mechanism. When the sensed temperature reaches the opening threshold, the control changes the electrical contact state to interrupt the connected circuit.

Limit Switching:
Opens the circuit at the upper temperature threshold and closes it again as the temperature falls to the reset threshold. This automatic switching cycle helps regulate equipment operation according to the control's temperature limits.

Replacement Guidelines:
Replace the York S1-025-32650-000 Temperature Control if it fails to open or close the circuit at the specified temperature thresholds. Replacement may be necessary if switching becomes inconsistent, the control fails to reset at the intended temperature, or the sensing mechanism shows visible damage. Select a replacement that matches the 280°F opening temperature and 250°F closing temperature specifications.

Common Failure Symptoms:

  • Circuit fails to open at the specified upper temperature.
  • Circuit does not close as temperature falls.
  • Switching occurs outside the designated temperature thresholds.
  • Electrical contacts fail to change state.
  • Temperature control operation becomes inconsistent.

Equipment Compatibility:
The York S1-025-32650-000 Temperature Control is an OEM replacement intended for designated York HVAC equipment requiring a 280°F opening temperature and a 250°F closing temperature. Its application depends on the equipment's original control specifications and required switching arrangement.

Technical Specifications:
Brand: York
Part Number: S1-025-32650-000
Product Type: Temperature Control
Opening Temperature: 280°F
Closing Temperature: 250°F

Write Your Own Review
You're reviewing:York S1-025-32650-000 Temperature Control 280°F Open/250°F Close
Your Rating
Customer Questions
How does the York S1-025-32650-000 temperature control regulate equipment operation?

It responds to sensed temperature changes by opening the connected circuit at 280°F and closing it again when the temperature falls to 250°F.

What do the 280°F open and 250°F close ratings mean?

The 280°F rating is the upper temperature threshold at which the control opens the circuit. The 250°F rating is the reset threshold at which it closes the circuit as temperature decreases.

Which York equipment is compatible with the S1-025-32650-000 temperature control?

It is intended for designated York HVAC equipment requiring the same 280°F opening and 250°F closing temperatures. Confirm the original equipment control specifications and switching arrangement before replacement.

What symptoms indicate a faulty York S1-025-32650-000 temperature control?

The circuit may fail to open at 280°F, remain open as temperature falls to 250°F, or switch inconsistently around the intended temperature thresholds.

What maintenance checks are recommended for the York S1-025-32650-000?

Inspect the control and its electrical connections for visible damage, and check for consistent circuit switching at the intended temperature thresholds. Follow the equipment manufacturer's maintenance guidance.