Facebook Pixel

Tecumseh TC-1156-E Compressor R-134 120V

Special Price $401.05 Regular Price $445.16
In stock
SKU
TC-1156-E
The Tecumseh TC-1156-E Compressor operates as a dependable, high-performance refrigeration compressor that uses R-134a refrigerant at 120V. The hermetically sealed unit supports commercial refrigeration equipment, including beverage coolers and display cases, and under-counter refrigerators. design has produced this compressor with both durability and efficiency and generates, a steady cooling output through minimal noise and vibration. It elevates refrigerant vapor pressure while raising its temperature before it reaches, the condenser unit to enables effective heat transfer and cooling operations. The small size of this component makes it suitable for HVAC systems that have limited installation space.
Manufacturer:
https://www.partshnc.com/media/catalog/product/t/c/tc-1156-e-1.jpg

Specifications

  • Type: Compressor
  • Refrigerant: R134
  • Voltage: 120V
Write Your Own Review
You're reviewing:Tecumseh TC-1156-E Compressor R-134 120V
Your Rating
Customer Questions
What maintenance is required for the Tecumseh TC-1156-E Compressor?

Regularly inspect for oil leaks, unusual noises, and vibration. Keep the surrounding area clean to maintain proper airflow. Check electrical connections for tightness and corrosion. Always disconnect power before performing maintenance.

What are common issues with the Tecumseh TC-1156-E Compressor?

  • Failure to start or intermittent operation.
  • Excessive vibration or humming noises.
  • Refrigerant leaks.
  • Overheating due to restricted airflow or electrical faults.

Installation Steps

Step 1: Turn off power and recover refrigerant from the system to ensure safety.

Step 2: Disconnect electrical wiring and refrigerant lines from the existing compressor.

Step 3: Remove the old compressor carefully, noting mounting orientation.

Step 4: Position the new compressor and secure it to the base.

Step 5: Reconnect refrigerant lines and electrical wiring according to the manufacturer’s diagram.

Step 6: Evacuate, recharge with refrigerant, restore power, and test for proper operation and leaks.