Facebook Pixel

Carrier SYSTXBB4ZC01 Evolution Damper Control

Special Price $1,221.04 Regular Price $1,355.35
In stock
SKU
SYSTXBB4ZC01
The Carrier SYSTXBB4ZC01 Evolution Damper Control is an electronic module manufactured for application in Carrier Evolution HVAC systems. It is used together with the system’s thermostat and dampers not included to offer zoned comfort in your home. Old school air conditioning systems control a single zone of the house, meaning some parts of the house may be over-cooled or over-heated. They do this by electronically controlling dampers that are placed within the duct work. These dampers operate to control the flow of air to the particular zones to allow each zone get the right amount of heat.
https://www.partshnc.com/media/catalog/product/s/y/systxbb4zc01.jpg

Specifications

  • Length: 4.2 "
  • Width: 1.5 "
  • Height: 6.4 "
  • Weight: 1.73lbs
  • Voltage: 24V
  • Display: No
  • Color: White
Manufacturer Name: Carrier
Product Number: SYSTXBB4ZC01
OEM Part Number: SYSTXBB4ZC01
Product Description: Evolution Damper Control
Weight:1.73lbs/784.71g

Choose the best HVAC equipment parts and supplies from PartsHnC!

  • Same Day Shipping

  • Best Quality And Best Price

  • Wide Range of Inventory

  • Best Customer Service

Have More Questions or Need Help to Place The Order?
Reach us at (866)773-0907 or [email protected]

Write Your Own Review
You're reviewing:Carrier SYSTXBB4ZC01 Evolution Damper Control
Your Rating
Customer Questions
What maintenance is required for the Carrier SYSTXBB4ZC01 Damper Control?

Regularly inspect the damper control for dust, debris, and secure wiring connections. Calibrate settings periodically to ensure proper airflow. Check for unusual noises or resistance during operation.

What are common issues with the Carrier SYSTXBB4ZC01 Damper Control?

  • Damper failing to open or close fully.
  • Erratic or delayed response to control signals.
  • Loose or damaged wiring connections.
  • Sensor misreadings causing improper airflow.

Installation Steps

Step 1: Turn off all power at the main breaker to ensure safety.

Step 2: Remove the HVAC unit access panel to reach the damper assembly.

Step 3: Disconnect the existing damper control and note wiring connections.

Step 4: Mount the new controller in place, ensuring correct alignment.

Step 5: Reconnect wiring following the installation diagram.

Step 6: Replace the access panel, restore power, and test damper operation.