Facebook Pixel

York S1-025-43246-000 SPST Temperature Control 55°F Open/28°F Close

Special Price $61.40 Regular Price $70.61
Out of stock
SKU
S1-025-43246-000
The York S1-025-43246-000 Temperature Control is a part of HVAC systems that keep the temperature regulated. It is an SPST switch that controls electrical circuits depending on the set temperature it is required to sense. At 55°F the switch deactivates the electrical circuit. It also means that the circuit is closed when the switch is closed which is at temperatures below 28°F. This switch turns on and off many kinds of HVAC parts such as compressors, fans, heaters etc.
https://www.partshnc.com/media/catalog/product/s/1/s1-025-43246-000.jpg

Specifications

  • Type: Temperature Control
  • Configuration: SPST
  • Temparature Rating: 55°F Open/28°F Close

Product Overview:
Low-temperature switching is managed by the York S1-025-43246-000 SPST Temperature Control. This OEM temperature control uses a single-pole, single-throw switch configuration, opening the electrical circuit at 55°F and closing it at 28°F. These temperature thresholds support automatic switching in compatible HVAC control applications.

Temperature-Responsive Switching:
Responds to sensed temperature changes by opening or closing its electrical contacts at the designated temperature thresholds. This supports the equipment's specified temperature-control sequence.

SPST Contact Operation:
Uses a single-pole, single-throw contact arrangement to control an electrical circuit. Its defined open and close points provide the switching response required by the connected system.

Replacement Guidelines:
A qualified HVAC technician should verify that the York S1-025-43246-000 matches the existing temperature control and equipment requirements. Confirm the SPST contact configuration, 55°F open and 28°F close settings, wiring, and mounting arrangement before installation. After fitting, test the switching response at the specified temperature points according to the manufacturer's service instructions.

Common Failure Symptoms:

  • Temperature-responsive switching does not occur at the specified points.
  • Electrical contacts fail to open or close correctly.
  • Connected equipment receives inconsistent control signals.
  • Temperature regulation becomes unreliable.
  • Control terminals or housing show visible damage.

Equipment Compatibility:
The York S1-025-43246-000 OEM SPST Temperature Control is compatible with select York equipment models, including BC090E24A7AAE3, BP078C00A5AAA3, BP078E09B2CAA3, BP090C00A2BAA4, BP102E24B2FAA3, and BP120E24P2WAA3. Verify the complete equipment model before ordering the replacement.

Technical Specifications:
Brand: York
Part Number: S1-025-43246-000
Product Type: SPST Temperature Control
Contact Configuration: Single-Pole, Single-Throw (SPST)
Open Temperature: 55°F
Close Temperature: 28°F

Write Your Own Review
You're reviewing:York S1-025-43246-000 SPST Temperature Control 55°F Open/28°F Close
Your Rating
Customer Questions
What maintenance helps keep this temperature control operating reliably?

Have a qualified technician inspect the electrical terminals, wiring, mounting, and switching response during scheduled HVAC maintenance.

How can I confirm this control is the correct replacement for my York equipment?

Match part number S1-025-43246-000 with the equipment manufacturer's parts documentation and verify the required temperature settings and SPST configuration.

What do the 55°F open and 28°F close settings indicate?

These values identify the specified temperatures at which the control opens and closes its electrical contacts.

What should I check before ordering an SPST temperature control?

Verify the contact arrangement, open and close temperature points, electrical connections, and mounting requirements against the existing control.

What should be tested after installation?

A qualified technician should verify that the contacts switch at the specified temperature points and that the connected equipment responds correctly.