Facebook Pixel
Sign-Up Bonus
Get 500 Reward Points instantly when you join.
Redeem Instantly
50 points = $1 off at checkout.
Earn as You Shop
$1 spent = 1 point every time you order.
Member Perks
Unlock exclusive member-only savings and offers.

Register and Earn 500 Reward Points
Toggle Nav
Search
Toggle Nav
Join Our Loyalty Program
main product photo

Secop Diversitech SCE18CNLX-1 LBP Compressor Kit R290 60Hz 115V

Rating:
5 5 1
1  Review Add Your Review
Special Price $646.73 Regular Price $717.88
In stock
SKU
SCE18CNLX-1
The Secop Diversitech SCE18CNLX-1 LBP Compressor Kit is used to circulate refrigerant during the cooling process in HVAC systems. It has the refrigerant capability of R290 and works on a 115-volt, 60 Hz, compressing low-pressure refrigerant vapor into a higher-pressure state as it is being used in commercial refrigeration units and packaged cooling elements. A piston motor-driven mechanism is applied that rotates on a continuous basis, pumping refrigerant through the suction and discharge lines of the closed loop. It is mounted in the refrigerant loop and it is connected to the system.
Add to Wish List
Refrigeration & Cooling, Compressors
Manufacturer:
https://www.partshnc.com/media/catalog/product/s/c/sce18cnlx-1.jpg
Write Your Own Review
You're reviewing:Secop Diversitech SCE18CNLX-1 LBP Compressor Kit R290 60Hz 115V
Your Rating
Product Questions (2)
Customer Questions
What maintenance is required for the Secop Diversitech SCE18CNLX-1 Compressor Kit?

Regularly inspect the compressor for oil leaks, vibration, and secure mounting. Check electrical connections and clean any dust or debris. Proper maintenance ensures efficient cooling performance and prevents operational issues. Always disconnect power before servicing.

What are common issues with the Secop Diversitech SCE18CNLX-1 Compressor Kit?

  • Failure to start or intermittent operation.
  • Overheating due to airflow restriction.
  • Refrigerant leaks or pressure issues.
  • Excessive vibration or unusual noise.

Installation Steps

Step 1: Turn off all power to the unit to prevent electrical shock.

Step 2: Recover any refrigerant and remove the existing compressor carefully.

Step 3: Position the new compressor in the mounting location.

Step 4: Secure the compressor using the supplied bolts and brackets.

Step 5: Connect electrical wiring and refrigerant lines following manufacturer specifications.

Step 6: Restore power, recharge refrigerant if needed, and test the unit for proper operation.