Facebook Pixel

Ruskin RUS-S120 Electric Actuator 27 In-Lb 100-240V

Special Price $754.11 Regular Price $837.06
In stock
SKU
RUS-S120
The Ruskin RUS-S120 Electric On/Off Spring Return Actuator offers dependable control of airflow and returns to the position for improved HVAC systems functionality. It operate electrically to open or close dampers with a voltage of 100-240V and having Torque Output of 27 in-lb. The actuator moves to the required position in the absence of force, the internal spring brings it back to the initial position. It is suitable for use in air handling units, VAV systems and ventilation dampers to maintain a constant performance during power failure. This actuator comes with a compact design, high energy efficiency and easy installation, hence increasing the durability of the system and the quality of air in the indoor condition.
Manufacturer:
https://www.partshnc.com/media/catalog/product/r/u/rus-s120_1.jpg

Specifications

  • Type: Actuator
  • Voltage: 100-240V
  • Torque Output: 27 in-lb
  • Spring Return: Yes
Write Your Own Review
You're reviewing:Ruskin RUS-S120 Electric Actuator 27 In-Lb 100-240V
Your Rating
Customer Questions
What maintenance is required for the Ruskin RUS-S120 Electric Actuator?

Regularly inspect the actuator for secure mounting, dust buildup, and signs of wear or corrosion. Test electrical connections and operational response periodically. Proper maintenance ensures smooth, accurate operation and prevents performance issues. Always disconnect power before servicing.

What are common issues with the Ruskin RUS-S120 Electric Actuator?

  • Sluggish or stuck movement.
  • Electrical connection failures.
  • Calibration drift.
  • Overheating during extended operation.

Installation Steps

Step 1: Turn off power to the HVAC system to ensure safety.

Step 2: Remove the existing actuator by loosening mounting screws and disconnecting wiring.

Step 3: Position the new actuator on the damper or valve shaft and secure it with screws.

Step 4: Connect wiring to the terminals according to the manufacturer’s diagram.

Step 5: Restore power and cycle the actuator to verify proper movement and alignment.

Step 6: Ensure the actuator operates smoothly without binding or obstruction.