Rheem-Ruud RTG20006DW Remote Controller UMC-117
Specifications
- Type: Remote Controller
- Material: Plastic
- Temperature: 100°F-140°F
- Weight: 0.64lbs
Loyalty ProgramProduct Overview:
Tankless water heaters use remote controls to let users adjust water temperature and access system information without operating the heater directly. The Rheem-Ruud RTG20006DW Remote Controller UMC-117 is a wired digital main remote control designed for compatible tankless water heater systems. It provides a separate user interface for adjusting temperature settings and accessing maintenance information from within the home.
Digital Temperature Adjustment:
The allows users to select the desired water temperature through its digital interface. Temperature settings can be adjusted in 2°F increments, from 100°F to a maximum of 140°F, subject to the operating limits of the connected water heater. The available temperature range therefore depends on the specifications of the heater system.
Tankless System Communication:
The functions as a user interface for compatible Rheem-Ruud tankless water heaters, providing access to temperature settings and maintenance information. Suitable systems can support up to three remote controls of different designated types, subject to the water heater's configuration.
Replacement Guidelines:
Replacement of the Rheem-Ruud RTG20006DW Remote Controller UMC-117 may be necessary when its digital display becomes unresponsive, temperature adjustment buttons stop functioning, or communication with the compatible tankless water heater becomes unreliable.
Common Failure Symptoms:
Equipment Compatibility:
The Rheem-Ruud RTG20006DW Remote Controller UMC-117 is an OEM wired digital remote control designed for compatible Rheem-Ruud tankless water heater systems. Replacement suitability depends on the specific water heater model, controller configuration, and wired connection requirements. Verify the existing controller part number and water heater model before selecting this replacement.
Technical Specifications:
Brand: Rheem-Ruud
Part Number: RTG20006DW
Controller Model: UMC-117
Product Type: Main Remote Controller
Step 1: Turn off power to the tankless water heater before connecting the controller.
Step 2: Mount it in a convenient indoor location away from moisture and heat.
Step 3: Run the low-voltage communication cable from the heater to the controller.
Step 4: Connect wires to the correct terminals per wiring diagram, ensuring solid contact.
Step 5: Restore power and check the display boots and communicates with the unit.
Step 6: Test temperature adjustment and diagnostics functions to confirm proper operation and safety limits.