Facebook Pixel
Sign-Up Bonus
Get 500 Reward Points instantly when you join.
Redeem Instantly
50 points = $1 off at checkout.
Earn as You Shop
$1 spent = 1 point every time you order.
Member Perks
Unlock exclusive member-only savings and offers.

Register and Earn 500 Reward Points
Toggle Nav
Search
Toggle Nav
Join Our Loyalty Program
main product photo

Rheem-Ruud SP46739 Burner Assembly

Be the first to review this product
Special Price $136.42 Regular Price $156.88
In stock
SKU
SP46739
The Rheem-Ruud SP46739 Burner Assembly is a module of combustion that is utilized in gas-fired furnace, boiler or water heater to combine gas and air and provide a uniform flame pattern to warm HVAC systems. It consists of a single or a series of burners of size to fit the input rating of the appliance, and is fitted in the combustion chamber below the gas valve. This is within the system gives the controlled combustion zone where fuel burns to produce heat and is supported with ignition and controls to help produce heat efficiently during normal operation.
Add to Wish List
Heating & Furnace Parts, Burners
Manufacturer:
https://www.partshnc.com/media/catalog/product/s/p/sp46739_2.png
Write Your Own Review
You're reviewing:Rheem-Ruud SP46739 Burner Assembly
Your Rating
Product Questions (2)
Customer Questions
What maintenance is required for the Rheem-Ruud SP46739 Burner Assembly?

Regularly inspect the burner assembly for soot, debris, or corrosion. Clean the burner ports and ensure proper alignment. Check gas connections for leaks, and follow all safety precautions when handling fuel and ignition components.

What are common issues with the Rheem-Ruud SP46739 Burner Assembly?

  • Uneven flame or incomplete combustion.
  • Clogging of burner ports.
  • Ignition failures or delayed start.
  • Gas leaks or faulty connections.

Installation Steps

Step 1: Turn off power and gas supply to the HVAC system and allow it to cool.

Step 2: Remove the access panel to reach the existing burner assembly.

Step 3: Disconnect wiring and gas connections, then remove mounting screws from the old burner.

Step 4: Install the new burner assembly, securing it with original mounts and reconnecting gas lines.

Step 5: Reconnect all wiring according to the unit schematic.

Step 6: Replace the access panel, restore power and gas supply, and test for proper ignition.