Facebook Pixel
Sign-Up Bonus
Get 500 Reward Points instantly when you join.
Redeem Instantly
50 points = $1 off at checkout.
Earn as You Shop
$1 spent = 1 point every time you order.
Member Perks
Unlock exclusive member-only savings and offers.

Register and Earn 500 Reward Points
Toggle Nav
Search
Toggle Nav
Join Our Loyalty Program
main product photo

Reznor RZ204611 Electrode Assembly

Be the first to review this product
Special Price $43.11 Regular Price $56.04
In stock
SKU
RZ204611
The Reznor RZ204611 Electrode Assembly is an ignition component designed for use in heating equipment to create and maintain flame ignition. It is applied within the burner section, and it creates the electrical spark required to ignite the fuel-air mixture during startup in HVAC systems. This assembly supports reliable burner operation by providing a consistent ignition connection and proper positioning near the combustion area. It operates as part of the ignition system in gas-fired heaters, equipment achieve dependable in heating performance during operation.
Add to Wish List
Heating & Furnace Parts, Ignitors & Ignition Assembly
Manufacturer:
https://www.partshnc.com/media/catalog/product/r/z/rz204611.jpg
Write Your Own Review
You're reviewing:Reznor RZ204611 Electrode Assembly
Your Rating
Product Questions (2)
Customer Questions
What maintenance is required for the Reznor RZ204611 Electrode Assembly?

Regularly inspect the electrode assembly for buildup, corrosion, or cracks. Clean gently with a non-abrasive cloth and verify secure electrical connections. Proper maintenance ensures accurate ignition and safe, consistent operation of the system.

What are common issues with the Reznor RZ204611 Electrode Assembly?

  • Failure to ignite or sparking issues.
  • Cracks or corrosion on electrodes.
  • Intermittent operation or weak spark.
  • Loose or damaged wiring connections.

Installation Steps

Step 1: Turn off gas supply and power to the heater to ensure safety.

Step 2: Remove the access panel and detach the existing electrode assembly.

Step 3: Mount the new electrode securely in the combustion chamber, aligning with the burner.

Step 4: Connect any wiring or grounding as required by the system.

Step 5: Check the electrode gap and position according to manufacturer specifications.

Step 6: Restore power and gas, then test ignition to confirm proper operation.