Facebook Pixel

Resideo VC7930ZZ32 Modulating Actuator 24V

Special Price $115.40 Regular Price $132.71
Out of stock
SKU
VC7930ZZ32
The Resideo VC7930ZZ32 Modulating Actuator is designed to provide accurate control for HVAC systems to improve the performance of temperature control. It changes the status of the valves according to control signals to regulate the flow. The actuator directly connects to the valves, which is powered by 24V supply voltage with the frequency of 50/60 Hz and works in 32°F–150°F temperature range and 5%–95% humidity range. It is applied in heating and cooling equipment and it maintains a steady condition without causing condensation. Advantages include energy efficiency, decreased stress on the system, increased comfort, and durability in various climates, which makes it suitable for the contemporary HVAC systems.
Manufacturer:
https://www.partshnc.com/media/catalog/product/v/c/vc7930zz32.jpg

Specifications

  • Type: Modulating Actuator
  • Mounting Type: Direct Coupled
  • Temperature Range: 32°F-150°F
  • Operating Relative Humidity Range: 5% - 95% Non-condensing
  • Supply Voltage: 24V
  • Power Supply Frequency: 50 Hz, 60 Hz
  • Actuator Connection: Valve
Write Your Own Review
You're reviewing:Resideo VC7930ZZ32 Modulating Actuator 24V
Your Rating
Customer Questions
What maintenance is required for the Resideo VC7930ZZ32 Modulating Actuator?

Regularly inspect the actuator for dust, debris, and loose wiring. Lubricate moving parts if recommended by the manufacturer. Test its modulation function periodically to ensure accurate control. Proper maintenance supports accurate system performance and prevents operational errors.

What are common issues with the Resideo VC7930ZZ32 Modulating Actuator?

  • Inaccurate or slow modulation.
  • Sticking or binding of mechanical components.
  • Electrical connection faults.
  • Noise or vibration during operation.

Installation Steps

Step 1: Turn off HVAC power at breaker; verify no voltage and lockout/tagout.

Step 2: Remove existing actuator and clean valve stem before installation.

Step 3: Align new actuator onto valve body and secure mounting bracket securely.

Step 4: Connect control wiring per schematic, ensure tight terminals properly verified.

Step 5: Restore power and run system test for modulation response functional check.