Facebook Pixel

Mitsubishi Electric R61Y21243 208-230V Reversing Valve Coil

Special Price $26.10 Regular Price $33.92
In stock
SKU
R61Y21243
The Mitsubishi Electric R61Y21243 Reversing Valve Coil is an electromagnetic component used to actuate the reversing valve in a heat pump. It generates a magnetic field when energized, allowing the valve mechanism to shift between mode. The 208-230V voltage rating indicate its compatibility with standard power supplies used in residential and light commercial equipment ensuring consistent electrical activation under normal operating conditions. In HVAC systems, this coil is applied in heat pump outdoor units where directional refrigerant flow must be controlled for mode changes. It is mounted on the valve body and work with control circuit to switching between operational states.
https://www.partshnc.com/media/catalog/product/r/6/r61y21243.jpg
Manufacturer Name: Mitsubishi Electric
Product Number: R61Y21243
OEM Part Number: R61Y21243
Product Description: 208-230V Reversing Valve Coil
Weight:0.31lbs/140.61g

Choose the best HVAC equipment parts and supplies from PartsHnC!

  • Same Day Shipping

  • Best Quality And Best Price

  • Wide Range of Inventory

  • Best Customer Service

Have More Questions or Need Help to Place The Order?
Reach us at (866)773-0907 or [email protected]

Write Your Own Review
You're reviewing:Mitsubishi Electric R61Y21243 208-230V Reversing Valve Coil
Your Rating
Customer Questions
What maintenance is required for the Mitsubishi Electric R61Y21243 Reversing Valve Coil?

Inspect the coil regularly for dust, dirt, or corrosion that can reduce efficiency. Ensure electrical connections are secure and free from wear. Proper maintenance prevents overheating and system failure, and careful handling avoids damage during service.

What are common issues with the Mitsubishi Electric R61Y21243 Reversing Valve Coil?

  • Coil overheating or burning out.
  • Poor electrical connections causing intermittent operation.
  • Valve sticking or failing to switch.
  • Insulation degradation or short circuits.

Installation Steps

Step1: Turn off electrical power to the unit at the breaker and confirm it’s off.

Step2: Access the outdoor unit and locate the existing reversing valve coil.

Step3: Disconnect wiring and remove retaining clip or screws from the old coil.

Step4: Slide off the old coil and install the new coil onto the valve stem.

Step5: Secure with the clip or screws and reconnect the electrical leads.

Step6: Restore power and test the system to ensure the valve shifts properly.