Facebook Pixel

Veris Industries PWRLX05S006A Wet Diffuser Transducer 0-250 PSI W/6' Cable

Special Price $699.67 Regular Price $776.63
In stock
SKU
PWRLX05S006A

The Veris Industries PWRLX05S006A is a wet differential pressure switch intended for use in HVAC equipment such as air handling units and fan coils. A 6-foot wire is included for simple installation. By monitoring the pressure differential across a wet coil—typically a heat exchanger where warm air transfers heat to cool, water-laden airflow—this switch plays a critical part in preventing water damage. The air pressure entering and leaving the wet coil is measured by the switch. A possible problem, such as a blocked coil or limited water flow, is indicated when the pressure differential drops below a predetermined threshold.

https://www.partshnc.com/media/catalog/product/p/w/pwrlx05s006a_veris-industries_partshnc.png
Manufacturer Name: Veris Industries
Product Number: PWRLX05S006A
OEM Part Number: PWRLX05S006A
Product Description: 0/250# Wetdiff#Xdcr W/6'Cable
Weight:2.37lbs/1075.01g

Choose the best HVAC equipment parts and supplies from PartsHnC!

  • Same Day Shipping

  • Best Quality And Best Price

  • Wide Range of Inventory

  • Best Customer Service

Have More Questions or Need Help to Place The Order?
Reach us at (866)773-0907 or [email protected]

Write Your Own Review
You're reviewing:Veris Industries PWRLX05S006A Wet Diffuser Transducer 0-250 PSI W/6' Cable
Your Rating
Customer Questions
What maintenance is required for the Veris Industries PWRLX05S006A Wet Differential Pressure Transducer?

Inspect the pressure ports, remote sensing lines, armored cable, and electrical connections for leaks, corrosion, or physical damage. Verify that the transducer output remains stable and perform zero calibration when required. Keeping sensing components clean helps maintain accurate differential pressure measurements. Always disconnect power before servicing the component.

What are common issues with the Veris Industries PWRLX05S006A Wet Differential Pressure Transducer?

  • Inaccurate differential pressure readings due to sensor drift.
  • Output signal fluctuations or loss of output.
  • Pressure port blockages affecting measurement accuracy.
  • Calibration errors causing incorrect control system responses.

Installation Steps

Step 1: Turn off and depressurize system before installation for safety.

Step 2: Mount the wet diffuser transducer securely in the line.

Step 3: Connect the cable to controller terminals per wiring diagram.

Step 4: Ensure fittings are sealed to prevent leaks and moisture ingress.

Step 5: Restore power, then verify signal output and calibrate if required, and commissioning.

Step 6: Wear PPE and follow electrical lockout procedures throughout installation.