Facebook Pixel

Enviro-tec PM-02-0086 480V1Ph 1/2Hp 1075Rpm 3Spd Motor

Special Price $588.29 Regular Price $653.01
Out of stock
SKU
PM-02-0086

The Enviro-tec PM-02-0086 480V1Ph 1/2HP 1075Rpm 3Spd Motor is a dependable powerhouse in the HVAC equipment industry. This engine guarantees efficient air circulation and plays a pivotal role in HVAC systems. The PM-02-0086 is a high-performing device that runs at 480 volts and has a 1/2 horsepower motor with three speeds of 1075 rpm. Because of its adaptability to varied HVAC configurations, it gives users the freedom to adjust airflows to suit their own comfort needs. The three-speed capability of the motor allows for fine control over air circulation, allowing for customized modifications in varying environmental circumstances. This motor's sturdy design reduces maintenance expenses and downtime while extending the lifespan of HVAC systems. An essential part is the Enviro-tec PM-02-0086 480V1Ph 1/2Hp 1075Rpm 3Spd Motor.

https://www.partshnc.com/media/catalog/product/P/M/PM-02-0086_enviro-tec_partshnc.jpg
Manufacturer Name: Enviro-tec
Product Number: PM-02-0086
OEM Part Number: PM-02-0086
Product Description: 480V1ph 1/2Hp 1075Rpm 3Spd Mtr
Weight:16.71lbs/7579.52g

Choose the best HVAC equipment parts and supplies from PartsHnC!

  • Same Day Shipping

  • Best Quality And Best Price

  • Wide Range of Inventory

  • Best Customer Service

Have More Questions or Need Help to Place The Order?
Reach us at (866)773-0907 or [email protected]

Write Your Own Review
You're reviewing:Enviro-tec PM-02-0086 480V1Ph 1/2Hp 1075Rpm 3Spd Motor
Your Rating
Customer Questions
What maintenance is required for the Enviro-tec PM-02-0086 Motor?

Regularly inspect the motor for dust buildup and clean vents to ensure proper airflow and cooling. Check electrical connections for tightness and signs of wear. Lubricate bearings if applicable and monitor for unusual noise or vibration. Always disconnect power before servicing for safety.

What are common issues with the Enviro-tec PM-02-0086 Motor?

  • Overheating due to restricted airflow or excessive load.
  • Unusual noise from worn bearings or internal components.
  • Failure to start caused by electrical faults or capacitor issues.
  • Inconsistent speed operation across settings.

Installation Steps

Step 1: Turn off all electrical power and secure zero voltage before handling.

Step 2: Remove blower access panel and label all motor wiring connections.

Step 3: Detach fan assembly from shaft and remove old motor mounting hardware.

Step 4: Install new motor using correct frame mounting and align shaft properly.

Step 5: Reattach blower wheel, ensuring no rubbing or imbalance.

Step 6: Reconnect high-voltage leads per wiring diagram for correct speed selection.

Step 7: Restore power and test rotation, airflow, and current draw for safe operation.