Facebook Pixel
Sign-Up Bonus
Get 500 Reward Points instantly when you join.
Redeem Instantly
50 points = $1 off at checkout.
Earn as You Shop
$1 spent = 1 point every time you order.
Member Perks
Unlock exclusive member-only savings and offers.

Register and Earn 500 Reward Points
Toggle Nav
Search
Toggle Nav
Join Our Loyalty Program
main product photo

Daikin-McQuay P910380513 Inducer Motor Assembly 300MBH

Be the first to review this product
Special Price $3,481.40 Regular Price $3,864.35
In stock
SKU
P910380513
Daikin-McQuay P910380513 Inducer Motor Assembly is a draught component used in compatible gas-fired heating systems to create and maintain proper flue airflow. Installed in HVAC systems, it drives the inducer fan to pull combustion gases through the heat exchanger and direct them into the venting system. It is typically used in residential, and commercial boiler or furnaces with higher input capacities up to 300 MBH. Within the system it supports combustion air movement, enable safe exhaust gas removal and ensures consistent burner operation by maintaining stable draft conditions during normal heating cycles.
Add to Wish List
Motors & Capacitors, Motors & Components
Manufacturer:
https://www.partshnc.com/media/catalog/product/p/9/p910380513.jpg
Write Your Own Review
You're reviewing:Daikin-McQuay P910380513 Inducer Motor Assembly 300MBH
Your Rating
Product Questions (2)
Customer Questions
What maintenance is required for the Daikin-McQuay P910380513 Motor Assembly?

Regularly inspect the motor and fan for dust, debris, and secure electrical connections. Lubricate bearings if applicable and check for proper alignment. Maintenance ensures smooth airflow, prevents overheating, and supports accurate combustion system operation.

What are common issues with the Daikin-McQuay P910380513 Motor Assembly?

  • Excessive noise or vibration.
  • Reduced airflow or weak draft.
  • Motor overheating or electrical failure.
  • Loose or worn fan components.

Installation Steps

Step 1: Turn off power to the equipment and allow it to cool completely.

Step 2: Remove the access panel to access the existing inducer motor assembly.

Step 3: Disconnect electrical wires and loosen mounting screws from the old assembly.

Step 4: Carefully remove the old inducer motor and clean the mounting area.

Step 5: Install the new motor assembly, secure it with screws, and reconnect wiring.

Step 6: Restore power and test the inducer motor for proper operation and airflow.