Facebook Pixel

Carrier P110-LFP1518 Humidifier Large Fan Powered

Special Price $524.47 Regular Price $582.16
In stock
SKU
P110-LFP1518
The Carrier P110-LFP1518 is a large Fan-Powered Humidifier that is intended to be installed directly into the existing heating and cooling system. It uses a fan to suck air through an evaporator pad which effectively absorbs water and expels it as vapor into the house. It has a long-lasting construction which is made from UV and corrosion-resistant plastic. Also, it has three different modes for setting the humidity and it can set the right amount of moisture in the house. In addition, the humidifier is easy to maintain and most of the servicing such as pad replacement takes less than 30 minutes.
Manufacturer:
https://www.partshnc.com/media/catalog/product/p/1/p110-lfp1518_carrier_partshnc.jpg

Specifications

  • Voltage: 24 VAC
  • Weight: 15.37lbs
  • Watts: 6
  • Type: Fan
  • Ampere: 0.5 Amps
  • Length: 17.4 "
  • Width: 18.5 "
  • Height: 13.8 "
Manufacturer Name: Carrier
Product Number: P110-LFP1518
OEM Part Number: P110-LFP1518
Product Description: Humidifier Fan Powered L Arge
Weight:15.37lbs/6971.71g

Choose the best HVAC equipment parts and supplies from PartsHnC!

  • Same Day Shipping

  • Best Quality And Best Price

  • Wide Range of Inventory

  • Best Customer Service

Have More Questions or Need Help to Place The Order?
Reach us at (866)773-0907 or [email protected]

Write Your Own Review
You're reviewing:Carrier P110-LFP1518 Humidifier Large Fan Powered
Your Rating
Customer Questions
What maintenance is required for the Carrier P110-LFP1518 Humidifier?

Regularly clean the water panels and reservoir to prevent mineral buildup. Check the fan motor and electrical connections for proper operation. Replace worn parts promptly and ensure water supply lines are free from leaks to maintain safe, efficient performance.

What are common issues with the Carrier P110-LFP1518 Humidifier?

  • Mineral buildup or clogged water panels.
  • Fan motor malfunctions or noise.
  • Leaking water connections.
  • Inconsistent humidity output.
  • Electrical or control failures.

Installation Steps

Step 1: Turn off HVAC system power and shut water supply before starting installation.

Step 2: Mount humidifier on supply or return duct using provided template and secure screws.

Step 3: Connect water feed line with proper fittings and install drain tubing if required.

Step 4: Wire unit to control board following low-voltage diagram carefully.

Step 5: Restore power and water, then test operation and adjust humidity settings while checking for leaks.