Facebook Pixel

Nidec-Embraco NT6220GKV2 208-230V1Ph R404A 3/4Hp Comp

Special Price $719.97 Regular Price $799.16
In stock
SKU
NT6220GKV2

The Nidec-Embraco NT6220GKV2 is a 3/4 horsepower compressor intended for use in a variety of refrigeration systems, such as commercial refrigerators, freezers, and air conditioners. It runs on single-phase power between 208 and 230 volts and uses R404A refrigerant, which is a popular option for medium-temperature applications. For this compressor to work, low-pressure refrigerant gas must be drawn in, compressed by a sequence of pistons or scrolls, and then released at a higher temperature and pressure. The refrigeration cycle ends there as the compressed refrigerant flows through the system, releasing heat through the condenser coils and absorbing heat from the air around it through the evaporator coils.

Manufacturer:
https://www.partshnc.com/media/catalog/product/n/t/nt6220gkv2.jpg
Manufacturer Name: Nidec-Embraco
Product Number: NT6220GKV2
OEM Part Number: NT6220GKV2
Product Description: 208-230V1ph R404a 3/4Hp Comp
Weight:38.65lbs/17531.33g

Choose the best HVAC equipment parts and supplies from PartsHnC!

  • Same Day Shipping

  • Best Quality And Best Price

  • Wide Range of Inventory

  • Best Customer Service

Have More Questions or Need Help to Place The Order?
Reach us at (866)773-0907 or [email protected]

Write Your Own Review
You're reviewing:Nidec-Embraco NT6220GKV2 208-230V1Ph R404A 3/4Hp Comp
Your Rating
Customer Questions
What maintenance is required for the Nidec-Embraco NT6220GKV2 Compressor?

Regularly check refrigerant levels and inspect electrical connections for tightness. Clean condenser coils to ensure efficient cooling and airflow. Lubricate moving parts as recommended and monitor for unusual vibrations or noise to prevent operational issues safely.

What are common issues with the Nidec-Embraco NT6220GKV2 Compressor?

  • Reduced cooling efficiency.
  • Unusual noise or vibrations.
  • Electrical connection faults.
  • Compressor overheating or tripping.
  • Inconsistent refrigeration performance.

Installation Steps

Step 1: Disconnect power and recover refrigerant safely using proper equipment.

Step 2: Remove old compressor and clean mounting base and lines.

Step 3: Install new unit, secure mounts, and connect suction/discharge lines.

Step 4: Braze connections, then evacuate system to remove moisture and leaks.

Step 5: Charge the refrigerant to specification and test operation.