Facebook Pixel

Nidec-Embraco NEK6214Z1 3/4HP Hermetic Compressor R-134A 115V/1PH

Special Price $521.34 Regular Price $578.69
In stock
SKU
NEK6214Z1
Nidec-Embraco NEK6214Z1 3/4HP hermetic compressor for refrigeration applications and HVAC systems using R-134A refrigerant. This compressor operates at 115V on a single phase setup and is suitable for commercial refrigeration systems, beverage coolers and display cases. Hermetically designed, it keeps down to a minimum leak problems and maintenance. It provides high energy efficiency, low noise levels and a reliable cooling performance. It is well-designed in that it ensures constant temperatures that increase the operational longevity of refrigeration units and reduce energy consumption for low-cost operation.
https://www.partshnc.com/media/catalog/product/n/e/nek6214z1.jpg

Specifications

  • Type: Hermetic
  • Horsepower: 3/4HP
  • Refrigerant: R-134A
  • Voltage: 115V
  • Phase: Single-phase
Manufacturer Name: Nidec-Embraco
Product Number: NEK6214Z1
OEM Part Number: NEK6214Z1
Product Description: 115V1ph R134a 3/4-Hp Comp
Weight:25.89lbs/11743.5g

Choose the best HVAC equipment parts and supplies from PartsHnC!

  • Same Day Shipping

  • Best Quality And Best Price

  • Wide Range of Inventory

  • Best Customer Service

Have More Questions or Need Help to Place The Order?
Reach us at (866)773-0907 or [email protected]

Write Your Own Review
You're reviewing:Nidec-Embraco NEK6214Z1 3/4HP Hermetic Compressor R-134A 115V/1PH
Your Rating
Customer Questions
What maintenance is required for the Nidec-Embraco NEK6214Z1 Hermetic Compressor?

Regularly check the compressor for oil levels, leaks, and unusual vibrations. Clean condenser coils and ensure proper airflow to prevent overheating. Tighten electrical connections and inspect insulation. Always disconnect power before performing maintenance for safety.

What are common issues with the Nidec-Embraco NEK6214Z1 Hermetic Compressor?

  • Reduced cooling efficiency.
  • Unusual vibration or noise.
  • Compressor overheating.
  • Electrical or start-up failures.

Installation Steps

Step1: Turn off power and recover refrigerant from the system safely.

Step2: Remove access panel and disconnect old compressor wiring and tubing.

Step3: Mount the new compressor, tighten electrical and refrigerant line connections.

Step4: Evacuate and recharge the system with correct refrigerant.

Step5: Restore power, start unit, and monitor for proper pressure, operation, and no leaks.