Facebook Pixel
Sign-Up Bonus
Get 500 Reward Points instantly when you join.
Redeem Instantly
50 points = $1 off at checkout.
Earn as You Shop
$1 spent = 1 point every time you order.
Member Perks
Unlock exclusive member-only savings and offers.

Register and Earn 500 Reward Points
Toggle Nav
Search
Toggle Nav
Join Our Loyalty Program
main product photo

Navien Tankless Water Heaters 30009437A Cold Inlet Pipe Assembly NPE

Be the first to review this product
Special Price $36.25 Regular Price $47.12
In stock
SKU
30009437A
The NAVIEN TANKLESS WATER HEATERS 30009437A Cold water inlet pipe assembly is a plumbing component used to direct the incoming cold water flow into the heat exchanger assembly in HVAC systems. It is fabricated to fit the unit's connection points and internal flow passages, incorporating built-in fittings and sealing surfaces that are parallel to the NPE series, ensuring proper alignment and water delivery. It is fitted in the, cold water supply line and it diverts the water to the inside passages of the heater where the heat exchanger, warms up the water.
Add to Wish List
Manufacturer:
https://www.partshnc.com/media/catalog/product/3/0/30009437a.jpg
Write Your Own Review
You're reviewing:Navien Tankless Water Heaters 30009437A Cold Inlet Pipe Assembly NPE
Your Rating
Product Questions (2)
Customer Questions
What maintenance is required for the Navien 30009437A Cold Inlet Pipe Assembly?

Regularly inspect the pipe assembly for leaks, corrosion, or mineral buildup. Ensure all connections are tight and clean any debris from the inlet. Proper maintenance prevents water flow issues and protects the heater from damage.

What are common issues with the Navien 30009437A Cold Inlet Pipe Assembly?

  • Leaks at joints or connections.
  • Reduced water flow due to sediment buildup.
  • Corrosion or rust forming on the pipe.
  • Water pressure fluctuations affecting performance.

Installation Steps

Step 1: Ensure the water heater is powered off and water supply is shut off.

Step 2: Drain residual water from the unit before removal.

Step 3: Disconnect the existing cold inlet pipe carefully.

Step 4: Attach the new assembly securely using proper fittings and seals.

Step 5: Tighten connections to prevent leaks.

Step 6: Restore water supply and check for leaks before powering the unit.