Facebook Pixel

Carrier 323267-702 Natural Burner Orifice #43

Special Price $46.62 Regular Price $60.61
In stock
SKU
323267-702
The Carrier 323267-702 Natural Burner Orifice is an essential part of the gas fired heating system. This small but unique component regulates the rate at which the gas flows to the burner for accurate and safe burning. It is also uniquely suited for natural gas applications and has exact measurements to control the mixture of the gas for efficiency. It operates by slowing down the amount of gas released through an opening that is cut to a specific size and lets just the right amount of gas to blend with air so that it can burn up fully. Such control ensures that fuel is not used haphazardly, it reduces emission of toxic gases and optimizes the heating system.
Manufacturer:
https://www.partshnc.com/media/catalog/product/3/2/323267-702.jpg

Specifications

  • Type: Natural Burner Orifice
    Manufacturer Name: Carrier
    Product Number: 323267-702
    OEM Part Number: 323267-702
    Product Description: Nat Burner Orifice #43
    Weight:0.05lbs/22.68g

    Choose the best HVAC equipment parts and supplies from PartsHnC!

    • Same Day Shipping

    • Best Quality And Best Price

    • Wide Range of Inventory

    • Best Customer Service

    Have More Questions or Need Help to Place The Order?
    Reach us at (866)773-0907 or [email protected]

    Write Your Own Review
    You're reviewing:Carrier 323267-702 Natural Burner Orifice #43
    Your Rating
    Customer Questions
    What maintenance is required for the Carrier 323267-702 Natural Burner Orifice?

    Inspect orifice regularly for dust, soot, or blockage and clean carefully to maintain proper gas flow. Ensure a secure fitting in the burner assembly. Check correct alignment and check for leaks to support better, efficient combustion performance.

    What are common issues with the Carrier 323267-702 Natural Burner Orifice?

    • Clogging from dust or carbon buildup reducing gas flow.
    • Incorrect flame pattern due to partial blockage.
    • Gas leakage from loose or improperly seated orifice.
    • Reduced heating efficiency from restricted fuel delivery.

    Installation Steps

    Step 1: Shut off gas supply and power, and ensure system is fully cool before starting.

    Step 2: Remove burner access panel and carefully take out existing orifice from burner tube.

    Step 3: Place new orifice into burner assembly and tighten securely to avoid leaks.

    Step 4: Reassemble panel, restore gas and power, then check all connections for leaks.

    Step 5: Start system and check steady flame operation, shutting down if irregular combustion is observed.