Facebook Pixel

Trane MOT11925 1/52HP Motor 1400 RPM CW 120V

Special Price $181.65 Regular Price $208.90
In stock
SKU
MOT11925
The Trane MOT11925 motor is a rather sturdily built part credited to the performance of diverse Trane climate control products like furnaces and air conditioners. This compact electric motor is utilized use mechanical energy converted from electrical energy which is the necessary force for most of the activities in the system. It runs at 120 volts and has a power output of 1/52 horsepower for proper functionality. The motor’s shaft rotates with an unchanging rate of 1400 revolutions per minute in the clockwise direction. This consistent rotation is necessary for driving fans and blowers that blow air around the HVAC system and keep temperatures at optimum.
Manufacturer:
https://www.partshnc.com/media/catalog/product/m/o/mot11925_trane_partshnc.png

Specifications

  • Type: Motor
  • Horsepower: 1/52 HP
  • Speed: 1400 RPM
  • Rotation: Clockwise (CW)
  • Voltage: 120V

Motor-driven components require rotational movement to operate within HVAC equipment. The Trane MOT11925 Motor provides mechanical drive through its rotating shaft. Its shaft rotation supports the operation of the connected component within the intended equipment assembly.

Motor Power Conversion and Shaft Movement:
The motor converts electrical energy into mechanical rotation through its shaft, providing movement to the connected component. Its 1/52 HP rating specifies the motor's mechanical power capacity for the intended load.

Rotational Speed and Direction:
The shaft operates at a specified speed of 1400 RPM with clockwise (CW) rotation. These characteristics define the motor's rotational configuration for driving the connected component.

Replacement Guidelines:
Replacement may be appropriate when a confirmed HVAC motor fault prevents the connected component from receiving the required mechanical drive. Before ordering, verify the existing part number and intended equipment application against the manufacturer's parts documentation.

Common Failure Symptoms:

  • Motor fails to start
  • Intermittent motor operation
  • Unusual operating noise
  • Excessive vibration
  • Inconsistent shaft rotation

Equipment Compatibility:
The Trane MOT11925 Motor is intended for compatible equipment requiring the appropriate motor configuration. Verify the equipment model and replacement part number against Trane parts documentation before purchasing.

Technical Specifications:
Product Identification:
Brand: Trane
Part Number: MOT11925
Product Type: Motor

Electrical:
Voltage: 120V

Mechanical:
Horsepower: 1/52 HP
Speed: 1400 RPM
Rotation: CW

Write Your Own Review
You're reviewing:Trane MOT11925 1/52HP Motor 1400 RPM CW 120V
Your Rating
Customer Questions
What maintenance is required for the Trane MOT11925 Motor?

Regularly inspect the motor for dust, debris, or signs of overheating. Lubricate bearings as recommended and ensure all electrical connections are secure. Always disconnect power before handling to prevent shocks and maintain reliable operation.

What are common issues with the Trane MOT11925 Motor?

  • Failure to start or intermittent operation.
  • Overheating during use.
  • Unusual vibration or noise.
  • Loose or corroded electrical connections.

What does the Trane MOT11925 motor do?

It provides rotational drive to the connected component within the HVAC assembly.

Can a motor with a different horsepower rating replace the MOT11925?

Not automatically. The replacement must meet the equipment's mechanical output, electrical, rotational, and application requirements. Confirm an approved alternative through the manufacturer's parts documentation.

Can the MOT11925 be replaced with a motor that rotates in the opposite direction?

Not unless the equipment and motor configuration specifically allow it. Verify the required shaft rotation and approved replacement before installation.

What could cause the MOT11925 to operate intermittently?

Possible causes include an electrical supply issue, an internal motor fault, or resistance in the connected component. Diagnose the cause before deciding whether the motor needs replacement.

What should be checked before ordering a replacement for the MOT11925?

Verify the part number, voltage, required shaft speed, rotation direction, and intended equipment application against the manufacturer's parts documentation.

What is the primary function of the Trane MOT11925 Electric Motor?

The MOT11925 converts electrical energy into rotary motion to drive the associated fan mechanism during HVAC equipment operation.

How does the 1400 RPM speed affect the Trane MOT11925 motor's operation?

The 1400 RPM rating indicates the motor's specified rotational speed, which determines how quickly its shaft turns and helps establish the required operating speed of the connected fan assembly.

How can I confirm the Trane MOT11925 is the correct OEM replacement for my HVAC equipment?

Compare the complete equipment model and original motor part number with Trane manufacturer documentation. Verify the 1/52 HP rating, 120V supply, 1400 RPM speed, clockwise rotation, shaft configuration, and mounting arrangement.

When should the Trane MOT11925 Motor be replaced?

Replace it when diagnostic testing confirms electrical failure, difficult or irregular shaft rotation, intermittent operation, or physical damage that prevents normal motor performance.

What maintenance checks help assess the condition of the MOT11925 Motor?

Inspect the motor housing, shaft, mounting points, and electrical connections for visible damage or looseness. Check for unusual noise, vibration, and irregular rotation during operation.

Installation Steps

Step1: Turn off all power to the equipment before starting.

Step2: Remove the existing motor carefully if replacing an old unit.

Step3: Mount the new motor securely on the bracket or base.

Step4: Align the motor shaft with the driven load and secure couplings.

Step5: Connect wiring according to the provided diagram for operation.

Step6: Double-check all connections and mounting for security.

Step7: Restore power and test motor rotation and performance before regular use.