Facebook Pixel

Carrier KSAHS2801AAA Hard Start Kit

Special Price $506.03 Regular Price $561.69
Out of stock
SKU
KSAHS2801AAA
Carrier KSAHS2801AAA Hard Start Kit is a component that improves the starting capacity of single phase AC and heat pump compressor. It does away with the issue of soft starts where the compressor is incapable of handling the first high current which results to low voltage, circuit breaker tripping and low efficiency. This kit used a capacitor and a relay to make sure that the compressor gets extra current to reach its operating speed without stressing. The hard start kit removes the first start current and shields the compressor and the electrical system against voltage variations, and increases the efficiency and durability of the system.
Manufacturer:
https://www.partshnc.com/media/catalog/product/k/s/ksahs2801aaa.jpg

Specifications

  • Type: Hard Start Kit
    Write Your Own Review
    You're reviewing:Carrier KSAHS2801AAA Hard Start Kit
    Your Rating
    Customer Questions
    What maintenance is required for the Carrier KSAHS2801AAA Hard Start Kit?

    Regularly inspect the kit for dust, corrosion, or loose wiring connections. Ensure the capacitor and relay components are clean and securely mounted. Test operation periodically to confirm proper starting performance. Always disconnect power before servicing.

    What are common issues with the Carrier KSAHS2801AAA Hard Start Kit?

    • Motor failing to start or slow start.
    • Relay or capacitor failure.
    • Loose or corroded electrical connections.
    • Overheating during repeated starts.

    Installation Steps

    Step 1: Turn off power to the HVAC system to prevent electric shock.

    Step 2: Locate the compressor and disconnect its power supply.

    Step 3: Mount the hard start kit securely near the compressor, following manufacturer guidelines.

    Step 4: Connect the kit wires to the compressor terminals according to the wiring diagram.

    Step 5: Ensure all connections are tight and insulated.

    Step 6: Restore power and test the compressor to confirm smoother startup and proper operation.