Facebook Pixel

Carrier HD46JQ460 ECM Motor Blower

Special Price $1,823.34 Regular Price $2,023.91
Out of stock
SKU
HD46JQ460
Carrier HD46JQ460 ECM Motor Blower is an HVAC system component to replace, which is used to effectively circulate air. It has an ECM which allows for a speed control of the device. This makes it possible to control the flow of air inside the room depending with your desire for comfort. As compared to the normal motors, the ECM motors are known to run more smoothly and with less noise, hence the energy consumption is low. This heavy duty motor blower is standard and can be found in many HVAC equipment like furnaces and air handlers. It draws its power from a conventional 460-volt electrical supply and a frequency of either 50 or 60 Hz.
Manufacturer:
https://www.partshnc.com/media/catalog/product/h/d/hd46jq460_carrier_partshnc.jpg

Specifications

  • Length: 14.3 "
  • Width: 12.3 "
  • Height: 11.5 "
  • Weight: 13.98lbs
  • Frequency: 50/60 Hz
  • Type: Motor Blower
Manufacturer Name: Carrier
Product Number: HD46JQ460
OEM Part Number: HD46JQ460
Product Description: Ecm Motor Blower
Weight:13.98lbs/6341.22g

Choose the best HVAC equipment parts and supplies from PartsHnC!

  • Same Day Shipping

  • Best Quality And Best Price

  • Wide Range of Inventory

  • Best Customer Service

Have More Questions or Need Help to Place The Order?
Reach us at (866)773-0907 or [email protected]

Write Your Own Review
You're reviewing:Carrier HD46JQ460 ECM Motor Blower
Your Rating
Customer Questions
What maintenance is required for the Carrier HD46JQ460 ECM Motor?

Regularly inspect and clean the blower fan and motor housing to prevent dust buildup, which can reduce airflow and efficiency. Lubricate bearings if needed, check electrical connections for safety, and ensure proper mounting to avoid vibration or noise issues.

What are common issues with the Carrier HD46JQ460 ECM Motor?

  • Reduced airflow due to debris buildup.
  • Unusual noise or vibration from misalignment.
  • Motor overheating from poor ventilation.
  • Blower fails to start or stalls during operation.

Installation Steps

Step 1: Turn off all power to the HVAC system for safety.

Step 2: Remove the access panel to reach the existing blower motor.

Step 3: Disconnect wiring and mounting hardware from the old motor.

Step 4: Install the new motor blower, ensuring proper alignment with the blower assembly.

Step 5: Reconnect wiring, secure all hardware, replace the panel, restore power, and test operation.