Facebook Pixel
Sign-Up Bonus
Get 500 Reward Points instantly when you join.
Redeem Instantly
50 points = $1 off at checkout.
Earn as You Shop
$1 spent = 1 point every time you order.
Member Perks
Unlock exclusive member-only savings and offers.

Register and Earn 500 Reward Points
Toggle Nav
Search
Toggle Nav
Join Our Loyalty Program
main product photo

Raypak H000329 Temperature Sensor 100K Ohm

Be the first to review this product
Special Price $126.04 Regular Price $144.94
In stock
SKU
H000329
The Raypak H000329 Temperature Sensor is used to measure water or equipment temperature, in heating HVAC systems. It has a rating of 100K ohms, an electrical resistance that changes with the temperature of the surrounding conditions, and enables a control circuit to use the temperature signal to control the operation of the system. It is connected to the control board by lead wiring, which conveys the temperature reading in the form of resistance. When the water flow is close to the temperature-sensitive parts of the equipment, constant temperature.
Add to Wish List
HVAC Controls & Electrical, Control & Sensing Devices
Manufacturer:
https://www.partshnc.com/media/catalog/product/h/0/h000329-1.jpg
Write Your Own Review
You're reviewing:Raypak H000329 Temperature Sensor 100K Ohm
Your Rating
Product Questions (2)
Customer Questions
What maintenance is required for the Raypak H000329 Temperature Sensor?

Periodically inspect the sensor for corrosion or physical damage, ensure secure connections, and clean any debris that may affect readings. Verify calibration to maintain accurate temperature monitoring. Proper care prevents incorrect measurements and system errors.

What are common issues with the Raypak H000329 Temperature Sensor?

  • Inaccurate temperature readings.
  • Sensor signal loss or intermittent output.
  • Corrosion on terminals or wires.
  • Physical damage to the sensing element.

Installation Steps

Step 1: Turn off power to the heating or pool system before installation.

Step 2: Locate the sensor port or existing sensor location.

Step 3: Remove the old sensor carefully if replacing.

Step 4: Insert the new sensor into the port, ensuring full contact with the fluid or surface.

Step 5: Connect the sensor wires to the control system following the wiring diagram.

Step 6: Restore power and test system operation to verify accurate temperature readings.