Facebook Pixel

Nidec-Embraco FFU160HAX1 Compressor R134A - 1/4HP, 115V/1PH

Special Price $447.15 Regular Price $496.33
In stock
SKU
FFU160HAX1
The Nidec-Embraco FFU160HAX1 is a 1/4 HP Compressor, which employs R134A refrigerant and has a voltage of 115V, single phase, 60Hz. This small compressor is ideal for use in domestic and small commercial refrigeration systems such as refrigerators, freezers and beverage coolers. It works using providing a cyclic compression of the refrigerant that makes possible heat transfer and cooling. It has a long life cycle and steady work, it does not take much space, so it is suitable to install. This compressor is also characterized by low noise emission which increases comfort in residential and working areas.
https://www.partshnc.com/media/catalog/product/f/f/ffu160hax1.jpg

Specifications

  • Size: 1/2"
  • Horsepower: 1/4 HP
  • Voltage: 115V
  • Phase: 1
  • Frequency: 60Hz
  • Weight: 25.19 Lbs
Manufacturer Name: Nidec-Embraco
Product Number: FFU160HAX1
OEM Part Number: FFU160HAX1
Product Description: 115V1ph R-134A Hp Compressor
Weight:25.19lbs/11425.98g

Choose the best HVAC equipment parts and supplies from PartsHnC!

  • Same Day Shipping

  • Best Quality And Best Price

  • Wide Range of Inventory

  • Best Customer Service

Have More Questions or Need Help to Place The Order?
Reach us at (866)773-0907 or [email protected]

Write Your Own Review
You're reviewing:Nidec-Embraco FFU160HAX1 Compressor R134A - 1/4HP, 115V/1PH
Your Rating
Customer Questions
What maintenance is required for the Nidec-Embraco FFU160HAX1 Compressor?

Regularly inspect the compressor for leaks, clean external surfaces to prevent dust buildup, and check refrigerant levels. Routine checks ensure safe operation and consistent cooling performance.

What are common issues with the Nidec-Embraco FFU160HAX1 Compressor?

  • Refrigerant leaks or low charge.
  • Overheating due to blocked airflow.
  • Electrical connection failures.
  • Unusual noise or vibration during operation.

Installation Steps

Step 1: Ensure power is off and disconnect the unit from the mains to prevent shock.

Step 2: Mount the compressor securely on a vibration-free surface using proper bolts.

Step 3: Connect suction and discharge lines according to system specifications.

Step 4: Attach electrical wiring following the labeled terminals and voltage rating.

Step 5: Evacuate and charge the system with refrigerant.

Step 6: Inspect all connections for leaks and ensure proper airflow before powering on.