Facebook Pixel

Mitsubishi Electric E22A56961 4 Way Valve

Special Price $93.16 Regular Price $107.14
Out of stock
SKU
E22A56961
The Mitsubishi Electric E22A56961 is a high-accuracy designed 4-way valve for HVAC use. It also makes it possible for the system to either remove heat from the inside air and expel the air outside or deliver air that had been heated outside, into the building, depending on weather conditions. This valve is mainly used in split systems, central air conditioning, and heating, heat pump systems to improve the adaptability and applicability of HVAC equipment. The performance of the system is enhanced and the consumption of energy is optimum. Its construction and engineering are highly durable and are therefore considered a permanent fixture in today’s HVAC systems.
https://www.partshnc.com/media/catalog/product/e/2/e22a56961.jpg

Specifications

  • Valve Type: 4 Way Valve
  • Size: 3/8"
  • Number of Ports: 4
  • Weight: 0.89 Lbs
Manufacturer Name: Mitsubishi Electric
Product Number: E22A56961
OEM Part Number: E22A56961
Product Description: 4 Way Valve
Weight:0.89lbs/403.7g

Choose the best HVAC equipment parts and supplies from PartsHnC!

  • Same Day Shipping

  • Best Quality And Best Price

  • Wide Range of Inventory

  • Best Customer Service

Have More Questions or Need Help to Place The Order?
Reach us at (866)773-0907 or [email protected]

Write Your Own Review
You're reviewing:Mitsubishi Electric E22A56961 4 Way Valve
Your Rating
Customer Questions
What maintenance is required for the Mitsubishi Electric E22A56961 Valve?

Regularly inspect the valve for leaks, corrosion, or unusual noise during operation. Ensure electrical connections are secure and free from dust. Periodically clean external components and verify smooth switching. Proper maintenance ensures accurate performance and supports preventing system inefficiencies or failures.

What are common issues with the Mitsubishi Electric E22A56961 Valve?

  • Valve failing to switch between modes.
  • Internal leakage affecting refrigerant flow.
  • Electrical coil malfunction or burnout.
  • Sticking or sluggish valve movement.
  • Unusual noise during operation cycles.

Installation Steps

Step 1: Disconnect power and refrigerant system, apply lockout/tagout and ensure safe pressure levels.

Step 2: Recover refrigerant fully before opening the system to avoid conductional release.

Step 3: Remove access panels and carefully detach the existing old reversing valve.

Step 4: Braze in the new valve using nitrogen purge to secure internal oxidation.

Step 5: Leak test all joints using nitrogen pressure and approved leak detection solution.

Step 6: Evacuate system to proper deep vacuum and confirm it holds.

Step 7: Restore power and test heating/cooling mode switching, confirming proper reversing operation.