Sanyo CV6233009599 Compressor R410A 208–230V 3-Phase
Specifications
- Type: Compressor
- Refrigerant: R410A
- Voltage: 208-230V
- Phase: 3PH
Loyalty ProgramAir-conditioning equipment depends on compressors to maintain the refrigerant circulation required for cooling operation. Within this system, the Sanyo CV6233009599 serves as a replacement compressor responsible for supporting the cooling cycle. Its primary role is to facilitate the refrigerant compression stage, enabling the system to transfer heat away from the conditioned space and maintain the required indoor temperature.
REFRIGERANT COMPRESSION AND CIRCULATION:
The Sanyo CV6233009599 compressor receives low-pressure R410A refrigerant vapor from the evaporator side of the refrigeration circuit. Its internal compression mechanism reduces the vapor's available volume, increasing its pressure and temperature. The resulting high-pressure vapor is discharged toward the condenser, where it releases heat and changes into a liquid before continuing through the refrigeration circuit. This sequence maintains the pressure difference needed for continuous refrigerant circulation.
COMPRESSOR DRIVE AND SYSTEM OPERATION:
The compressor's motor-driven operation provides the mechanical energy needed to maintain refrigerant compression during the cooling cycle. The CV6233009599 is specified for a three-phase electrical supply, which must correspond with the connected equipment's electrical configuration.
REPLACEMENT GUIDELINES:
Replacement may be appropriate when the compressor fails to start or the air-conditioning equipment can no longer maintain the required cooling performance. Before ordering, compare the existing compressor part number with the applicable equipment requirements and verified specifications.
COMMON FAILURE SYMPTOMS:
EQUIPMENT COMPATIBILITY:
The Sanyo CV6233009599 compressor should be matched with air-conditioning equipment requiring the corresponding Sanyo compressor configuration, R410A refrigerant, and 208–230V three-phase electrical characteristics. Before installation, verify the existing compressor part number, refrigerant requirements, electrical specifications, and applicable equipment documentation to confirm the correct application.
TECHNICAL SPECIFICATIONS:
Part Identification:
Brand: Sanyo
Part Number: CV6233009599
Product Type: Compressor
Refrigerant Specifications:
Refrigerant: R410A
Electrical Specifications:
Voltage: 208–230V
Phase: 3PH (Three Phase)