Facebook Pixel

Trane CPT02329 Start Capacitor 229°F

Special Price $64.68 Regular Price $74.38
In stock
SKU
CPT02329
Trane CPT02329 Start-Capacitor is used in single-phase air conditioning and refrigeration system. It delivers an amount of current to the motor during starting which enables it to start overcoming the initial load and attain no load speed. This capacitor stores electrical energy and supplies it when the motor starts thus increasing the starting torque. It is necessary for those motors that need a high starting current like air conditioning, heat pump, refrigeration motors etc. Selecting a better quality start capacitor such as the one described above will help in enhancing the operations of the system, minimize the amount of strain put on the motor and enhance energy consumption.
Manufacturer:
https://www.partshnc.com/media/catalog/product/c/p/cpt02329.jpg

Specifications

  • Type: Start Capacitor
  • Capacitance: 229µF
Manufacturer Name: Trane
Product Number: CPT02329
OEM Part Number: CPT02329
Product Description: Start Capacitor 229 Mfd
Weight:1lbs/453.59g

Choose the best HVAC equipment parts and supplies from PartsHnC!

  • Same Day Shipping

  • Best Quality And Best Price

  • Wide Range of Inventory

  • Best Customer Service

Have More Questions or Need Help to Place The Order?
Reach us at (866)773-0907 or [email protected]

Write Your Own Review
You're reviewing:Trane CPT02329 Start Capacitor 229°F
Your Rating
Customer Questions
What maintenance is required for the Trane CPT02329 Start Capacitor?

Regularly inspect the capacitor for bulging, leaks, or corrosion. Ensure electrical connections are tight and free from dirt or oxidation. Keep the unit in a dry, ventilated condition to prevent overheating. Always disconnect power before handling to avoid electrical hazards.

What are common issues with the Trane CPT02329 Start Capacitor?

  • Capacitor bulging or leaking.
  • Failure to provide proper start assist.
  • Intermittent electrical connection issues.
  • Overheating during operation.

Installation Steps

Step 1: Turn off power to the unit and disconnect from the mains to ensure safety.

Step 2: Discharge the capacitor using a proper insulated tool.

Step 3: Note wiring connections on the existing capacitor for reference.

Step 4: Remove the old capacitor and mount the new capacitor securely in place.

Step 5: Reconnect wiring according to the original terminals.

Step 6: Restore power and test motor startup for correct operation.