Facebook Pixel

Trane COM11916 5-Ton Scroll Compressor R410A 208-230V

Special Price $1,738.12 Regular Price $2,116.95
In stock
SKU
COM11916
The Trane COM11916 5-Ton Scroll Compressor is a highly efficient HVAC equipment which is used with R410A refrigerant and has 208-230V power supply. This scroll compressor is applied in air conditioning and heat pump systems; it provides stable and steady performance. It uses a scroll type which offers easy, noiseless movement and at the same time offers energy saving. The 5-ton capacity enables it to be used for residential and light commercial use with the better cooling capacity. Advantages include; low operating, low noise levels, and long system life and is therefore suitable for energy conservation and environmental climate control.
Manufacturer:
https://www.partshnc.com/media/catalog/product/c/o/com11916.jpg

Specifications

  • Type: Scroll Compressor
  • Voltage: 208-230V
  • Capacity: 5 Ton
  • Refrigerant: R410A
Write Your Own Review
You're reviewing:Trane COM11916 5-Ton Scroll Compressor R410A 208-230V
Your Rating
Customer Questions
What maintenance is required for the Trane COM11916 Scroll Compressor?

Regularly inspect the compressor for refrigerant leaks, clean surrounding coils, and check electrical connections. Ensure proper lubrication if applicable and monitor system pressures. Maintenance supports efficient operation, prevents overheating, and reduces the risk of performance issues.

What are common issues with the Trane COM11916 Scroll Compressor?

  • Refrigerant leaks or low charge.
  • Excessive noise or vibration.
  • Electrical connection failures.
  • Reduced cooling capacity or inconsistent performance.

Installation Steps

Step 1: Turn off power and recover refrigerant from the system following safety regulations.

Step 2: Remove the old compressor, noting refrigerant lines and electrical connections.

Step 3: Mount the new comperssor securely on the compressor base, aligning vibration isolators.

Step 4: Connect refrigerant lines using proper fittings and torque specifications.

Step 5: Wire the compressor according to the electrical diagram.

Step 6: Evacuate, recharge with refrigerant, and test for correct operation and leaks.