The Beckett Igniter BPW201 ADC Oil Burner Chassis is a heating solution for applications without AC power and is a heating solution. This burner is powered by direct current power supply and the Beckett GeniSys Control system controls the motor, igniter and solenoid valve efficiently. It has interrupted duty ignition which means that full current is only drawn during ignition and hence saves battery power. The burner can burn from 0.75 to 2.50 GPH of fuel suitable for most of the HVAC equipment such as oil furnace, hydronic heating systems etc.
What maintenance is required for the Beckett BPW201 ADC Oil Burner Chassis?
Regularly inspect the chassis for dirt, corrosion, or loose components. Clean the burner assembly and ensure all electrical connections are secure. Lubricate moving parts if recommended by the manufacturer. Always disconnect power before maintenance to prevent shocks and ensure safe operation.
What are common issues with the Beckett BPW201 ADC Oil Burner Chassis?
Failure to ignite the burner.
Intermittent or weak spark from the igniter.
Loose or corroded electrical connections.
Overheating or chassis misalignment affecting operation.
Installation Steps
Step1: Turn off power and fuel supply before starting.
Step2: Access the ADC oil burner chassis and locate the old igniter.
Step3: Remove the old igniter carefully without damaging nearby components.
Step4: Install the new igniter in the same position and secure it.
Step5: Reconnect wiring per manufacturer specs, restore power and fuel, then test ignition.
Loyalty Program
