Facebook Pixel
Sign-Up Bonus
Get 500 Reward Points instantly when you join.
Redeem Instantly
50 points = $1 off at checkout.
Earn as You Shop
$1 spent = 1 point every time you order.
Member Perks
Unlock exclusive member-only savings and offers.

Register and Earn 500 Reward Points
Toggle Nav
Search
Toggle Nav
Join Our Loyalty Program
main product photo

Bosch Hvac 7098920 Burner Plate Gasket 45kW

Be the first to review this product
Special Price $91.03 Regular Price $104.68
In stock
SKU
7098920
The Bosch HVAC 7098920 Burner Plate Gasket is a seal element in the chamber of 45 kW commercial and residential gas-fired HVAC systems. It is used to seal the gaps and ensure that the combustion gases do not escape into the burner compartment, so that the airflow and pressure are kept in order. It is installed in service or when the burner is being replaced and it lines up and closes the gap where the burner is being attached to the heat exchanger.
Add to Wish List
HVAC Accessories, Gaskets & Seals
Manufacturer:
https://www.partshnc.com/media/catalog/product/7/0/7098920.jpg
Write Your Own Review
You're reviewing:Bosch Hvac 7098920 Burner Plate Gasket 45kW
Your Rating
Product Questions (2)
Customer Questions
What maintenance is required for the Bosch HVAC 7098920 Burner Plate Gasket?

Inspect the gasket regularly for cracks, compression, or signs of wear and replace if damaged. Clean the mating surfaces to ensure a proper seal and prevent leaks. Proper maintenance helps maintain combustion efficiency and safe operation. Always shut off power and fuel before servicing.

What are common issues with the Bosch HVAC 7098920 Burner Plate Gasket?

  • Cracks or splits reducing seal effectiveness.
  • Compression or flattening from extended use.
  • Leakage at the burner plate joint.
  • Contamination from soot or debris.
  • Poor sealing due to uneven surface contact.

Installation Steps

Step 1: Turn off power and gas supply to the HVAC unit and allow it to cool.

Step 2: Remove the burner access panel to expose the burner plate.

Step 3: Carefully remove the old gasket from the burner plate.

Step 4: Place the new gasket, ensuring it aligns properly with the plate.

Step 5: Reinstall the burner plate and secure all fasteners.

Step 6: Replace the access panel, restore power and gas supply, and test the unit.