Facebook Pixel

Trane BAYKSKT250A Hard Start Kit 112 MFD 330V

Special Price $178.77 Regular Price $205.59
In stock
SKU
BAYKSKT250A
The Trane BAYKSKT250A is a Hard Start Kit that is critical in boosting the starting capability of HVAC compressors. This kit supplies the compressor with an initial boost of power to start the unit and reduce the effort needed. Designed to work at 330V it is compatible only with Trane HVAC systems to provide the better results possible. This decreases the stress on the compressor and start-up current as well as improves the reliability of the total system. This leads to improved energy use, lower maintenance expenses, and comfort because of improved HVAC performance.
Manufacturer:
https://www.partshnc.com/media/catalog/product/b/a/baykskt250a.jpg

Specifications

  • Type: Start
  • Voltage: 330V
  • Weight: 1.71 Lbs
Manufacturer Name: Trane
Product Number: BAYKSKT250A
OEM Part Number: BAYKSKT250A
Product Description: 112Mfd 330V Hard Start Kit
Weight:1.71lbs/775.64g

Choose the best HVAC equipment parts and supplies from PartsHnC!

  • Same Day Shipping

  • Best Quality And Best Price

  • Wide Range of Inventory

  • Best Customer Service

Have More Questions or Need Help to Place The Order?
Reach us at (866)773-0907 or [email protected]

Write Your Own Review
You're reviewing:Trane BAYKSKT250A Hard Start Kit 112 MFD 330V
Your Rating
Customer Questions
What maintenance is required for the Trane BAYKSKT250A Hard Start Kit?

Inspect connections for tightness and corrosion regularly. Keep unit clean and dry to prevent arcing or overheating. Ensure accurate compressor start and reduced system strain. Disconnect power during service.

What are common issues with the Trane BAYKSKT250A Hard Start Kit?

  • Hard start capacitor failure causing compressor failure.
  • Intermittent starting or no start condition.
  • Overheating of start components under load.
  • Clicking or repeated start attempts due to relay issues.
  • Compressor fails to connect consistently.

Installation Steps

Step 1: Turn off power to HVAC unit and check zero voltage.

Step 2: Access condenser control panel and discharge capacitor safely.

Step 3: Remove old start capacitor and note wiring configuration.

Step 4: Install new start capacitor kit and reconnect terminals correctly.

Step 5: Secure kit firmly to prevent vibration or contact with moving parts.

Step 6: Restore power and test compressor start cycle for smooth operation.

Step 7: Ensure capacitor is fully discharged before handling to avoid electric shock risk.