Facebook Pixel

Amana-Goodman B1392705 Pressure Switch Hose

Special Price $4.08 Regular Price $5.51
In stock
SKU
B1392705
The Amana-Goodman B1392705 Pressure Switch Hose is a pressure-sensing line that transfers pressure between connected components. Its internal passage carries pressure from the monitored source to the pressure switch, allowing the switch mechanism to respond to the transmitted condition in HVAC systems. The hose is routed between the designated pressure connection and switch port, with its ends secured at the corresponding fittings. By maintaining a continuous pressure path, it conveys the sensed pressure to the switch and supports the electrical switching action associated with the monitored equipment circuit.
https://www.partshnc.com/media/catalog/product/b/1/b1392705_amana-goodman_partshnc.png
Manufacturer Name: Amana-Goodman
Product Number: B1392705
OEM Part Number: B1392705
Product Description: Pressure Switch Hose
Weight:0.14lbs/63.5g

Choose the best HVAC equipment parts and supplies from PartsHnC!

  • Same Day Shipping

  • Best Quality And Best Price

  • Wide Range of Inventory

  • Best Customer Service

Have More Questions or Need Help to Place The Order?
Reach us at (866)773-0907 or [email protected]

Write Your Own Review
You're reviewing:Amana-Goodman B1392705 Pressure Switch Hose
Your Rating
Customer Questions
What maintenance is required for the Amana-Goodman B1392705 Pressure Switch Hose?

Inspect the hose regularly for cracks, leaks, or blockages that could affect pressure readings. Ensure all connections are tight and free from debris. Replace if hardened or brittle. Avoid sharp bends to maintain accurate system performance.

What are common issues with the Amana-Goodman B1392705 Pressure Switch Hose?

  • cracks causing pressure loss.
  • Loose fittings causing intermittent furnace operation.
  • Blockages from debris or moisture.
  • Hose collapse or kinking affecting airflow signals.
  • Degraded rubber leading to pressure inconsistencies.
  • Disconnected hose causing ignition lockout.

Installation Steps

Step 1: Turn off furnace power and gas supply; allow cooling.

Step 2: Remove old hose, noting routing.

Step 3: Install new hose securely on the fittings.

Step 4: Route away from heat and moving parts.

Step 5: Wear insulated gloves.

Step 6: Restore power and test ignition/pressure switch.

Step 7: Check for leaks and stable operation.