Facebook Pixel

Daikin-McQuay 99S0038 EEV Magnet 17.5mm ID

Special Price $304.31 Regular Price $337.79
In stock
SKU
99S0038
The Daikin-McQuay 99S0038 EEV Magnet is a unique part that is used in electronic expansion valves in HVAC systems used in controlling the flow of refrigerant to the evaporator section its inner diameter is 17.5mm. EEVs used stepper motors and electronic controls for fine tuning and the motors respond to temperature and pressure fluctuations to make quick adjustments to changing load conditions. The EEV Magnet improves this function by applying the required magnetic force to drive the valve and control the refrigerant flow rate accurately. This leads to several advantages such as the ability to increase energy efficiency, which can be up to 30% less, and retain full capacity control even when the load varies.
Manufacturer:
https://www.partshnc.com/media/catalog/product/9/9/99s0038.jpg

Specifications

  • Type: EEV Magnet
  • Inner Diameter: 17.5 mm
Manufacturer Name: Daikin-McQuay
Product Number: 99S0038
OEM Part Number: 99S0038
Product Description: Magnet For Eev 17.5 Mm Id
Weight:0.14lbs/63.5g

Choose the best HVAC equipment parts and supplies from PartsHnC!

  • Same Day Shipping

  • Best Quality And Best Price

  • Wide Range of Inventory

  • Best Customer Service

Have More Questions or Need Help to Place The Order?
Reach us at (866)773-0907 or [email protected]

Write Your Own Review
You're reviewing:Daikin-McQuay 99S0038 EEV Magnet 17.5mm ID
Your Rating
Customer Questions
What maintenance is required for the Daikin-McQuay 99S0038 Magnet?

Regularly inspect the magnet for debris, corrosion, or physical damage. Clean gently and ensure it is properly seated in the expansion valve assembly. Proper maintenance ensures accurate valve operation and consistent refrigerant flow.

What are common issues with the Daikin-McQuay 99S0038 Magnet?

  • Weak or lost magnetic force.
  • Misalignment in the expansion valve.
  • Debris or corrosion obstructing movement.
  • Inconsistent refrigerant flow.
  • Difficulty in valve actuation.

Installation Steps

Step 1: Turn off power and isolate HVAC system; confirm zero voltage and secure lockout/tagout.

Step 2: Access electronic expansion valve assembly and remove existing magnet carefully.

Step 3: Clean mounting area and ensure valve stem is free of debris or wear.

Step 4: Install new magnet, aligning it properly on the EEV actuator.

Step 5: Restore wiring and system power, then test valve response and refrigerant control.