Facebook Pixel

Velocity Boiler Works (Crown) 960123 M/R Spill Switch

Special Price $38.81 Regular Price $50.45
In stock
SKU
960123

The Velocity Boiler Works (Crown) 960123 Spill Switch Mr is a critical safety component used in HVAC (Heating, Ventilation, and Air Conditioning) systems. This spill switch is intended to monitor the flue gas temperature and identify any possible spills or leaks in the system. It works by sensing an excessive spike in temperature, which might signal a failure or obstruction in the flue, causing the switch to turn off the system to prevent dangerous circumstances like carbon monoxide accumulation. This mechanism, which is often installed in boilers and water heaters, provides safe operation by halting the equipment's performance when needed. The 960123 Spill Switch Mr offers greater safety, protection against carbon monoxide poisoning, and prevention of equipment damage caused from overheating. 

https://www.partshnc.com/media/catalog/product/9/6/960123.jpg
Manufacturer Name: Velocity Boiler Works (Crown)
Product Number: 960123
OEM Part Number: 960123
Product Description: Spill Switch Mr
Weight:0.1lbs/45.36g

Choose the best HVAC equipment parts and supplies from PartsHnC!

  • Same Day Shipping

  • Best Quality And Best Price

  • Wide Range of Inventory

  • Best Customer Service

Have More Questions or Need Help to Place The Order?
Reach us at (866)773-0907 or [email protected]

Write Your Own Review
You're reviewing:Velocity Boiler Works (Crown) 960123 M/R Spill Switch
Your Rating
Customer Questions
What maintenance is required for the Velocity Boiler Works (Crown) 960123 Spill Switch?

Regularly inspect the switch for soot buildup, corrosion, or debris. Ensure all electrical connections are secure and free of damage. Test the switch periodically to confirm proper operation. Always turn off power before servicing for safety.

What are common issues with the Velocity Boiler Works (Crown) 960123 Spill Switch?

  • Failure to detect flue gas spills.
  • Erratic or delayed switch activation.
  • Corrosion or buildup interfering with operation.
  • Loose or faulty electrical connections.

Installation Steps

Step 1: Turn off all power to the HVAC system and shut off fuel supply before installation.

Step 2: Locate and remove the old spill switch, noting wiring and mounting.

Step 3: Mount the new spill switch securely in the designated location.

Step 4: Reconnect wiring according to the manufacturer’s diagram.

Step 5: Ensure all connections are tight and properly insulated.

Step 6: Restore power, fuel, and test to verify correct spill switch operation.