Facebook Pixel

Velocity Boiler Works (Crown) 95-038 Temperature & Pressure Gauge

Special Price $67.24 Regular Price $77.32
In stock
SKU
95-038
The Velocity Boiler Works (Crown) 95-038 Temperature & Pressure Gauge is an essential part of the system used for measuring the efficiency of HVAC systems, especially in heating systems. This pressure gauge is used to indicate both the temperature and pressure of water or steam to control the working of boilers and heating systems. Designed to work at 24V, it offers accurate measurements to allow the technicians to determine system performance and possible problems. This is essential because it offers real-time information on the system improving safety and performance by informing when maintenance is due and preventing system breakdowns.
https://www.partshnc.com/media/catalog/product/9/5/95-038.jpg

Specifications

  • Type: Pressure Gauge
  • Voltage: 24V
  • Weight: 0.85 Lbs
Manufacturer Name: Velocity Boiler Works (Crown)
Product Number: 95-038
OEM Part Number: 95-038
Product Description: Temp/Press.Gauge (Residential)
Weight:0.85lbs/385.55g

Choose the best HVAC equipment parts and supplies from PartsHnC!

  • Same Day Shipping

  • Best Quality And Best Price

  • Wide Range of Inventory

  • Best Customer Service

Have More Questions or Need Help to Place The Order?
Reach us at (866)773-0907 or [email protected]

Write Your Own Review
You're reviewing:Velocity Boiler Works (Crown) 95-038 Temperature & Pressure Gauge
Your Rating
Customer Questions
What maintenance is required for the Velocity Boiler Works (Crown) 95-038 Temperature & Pressure Gauge?

Regularly inspect the gauge for accurate readings and check for any signs of wear, leaks, or damage. Ensure connections remain tight and free from corrosion. Periodically verify calibration against a known standard. Always depressurize the system before handling to maintain safety.

What are common issues with the Velocity Boiler Works (Crown) 95-038 Temperature & Pressure Gauge?

  • Inaccurate or fluctuating readings.
  • Needle sticking or not returning to zero.
  • Internal condensation affecting visibility.
  • Pressure or temperature misalignment.
  • Cracked lens or damaged casing.
  • Loose or leaking connection points.

Installation Steps

Step 1: Turn off boiler power and allow system to cool completely before servicing.

Step 2: Drain pressure from system to prevent hot water or steam release.

Step 3: Remove old gauge from boiler port using proper wrench.

Step 4: Apply thread sealant to new gauge and install securely in same port.

Step 5: Tighten carefully, avoiding over-torquing or damage to fittings.

Step 6: Restore water, power, and check for leaks while monitoring normal operating pressure and temperature.