Facebook Pixel

Schneider Electric (Square D) 9013FHG2J43M1X Pressure Switch On 60 PSI Off 80 PSI

Special Price $113.19 Regular Price $130.16
In stock
SKU
9013FHG2J43M1X
The Schneider Electric (Square D) 9013FHG2J43M1X-Pressure Switch is durable and can be used in HVAC systems, especially with air compressors and water pumps. It operates at a cut-in pressure of 60 PSI and a cut-out out at 80 PSI and monitors and controls pressure levels to keep the system running efficiently and safely. The benefit of this switch is that it maintains consistent performance by acting as a safety mechanism in preventing overpressurization and damaging equipment. It is used in air conditioning HVAC assemblies, and provides quick installation and durable operation; it enhances machine life, reduces maintenance requirements, and energy management.
https://www.partshnc.com/media/catalog/product/9/0/9013fhg2j43m1x.jpg

Specifications

  • Type: Pressure Switch
  • Cut-Out Pressure: 80 PSI
  • Cut-In Pressure: 60 PSI
Manufacturer Name: Schneider Electric (Square D)
Product Number: 9013FHG2J43M1X
OEM Part Number: 9013FHG2J43M1X
Product Description: On#60 Off#80 Pressure Switch
Weight:0.9lbs/408.23g

Choose the best HVAC equipment parts and supplies from PartsHnC!

  • Same Day Shipping

  • Best Quality And Best Price

  • Wide Range of Inventory

  • Best Customer Service

Have More Questions or Need Help to Place The Order?
Reach us at (866)773-0907 or [email protected]

Write Your Own Review
You're reviewing:Schneider Electric (Square D) 9013FHG2J43M1X Pressure Switch On 60 PSI Off 80 PSI
Your Rating
Customer Questions
What maintenance is required for the Schneider Electric (Square D) 9013FHG2J43M1X Pressure Switch?

Regularly inspect electrical contacts, wiring, and the pressure sensing port for corrosion, looseness, and debris to ensure safe, accurate operation. Verify pressure settings and recalibrate when accurate switching performance. Always depressurize the system before servicing to prevent injury.

What are common issues with the Schneider Electric (Square D) 9013FHG2J43M1X Pressure Switch?

  • Inaccurate switching at set pressure due to worn or misaligned internal components.
  • Electrical contact wear causing intermittent operation.
  • Diaphragm leakage leading to pressure sensing failure.
  • Short cycling from unstable system pressure or faulty adjustment.

Installation Steps

Step 1: Turn off electrical power and depressurize the system completely before servicing.

Step 2: Locate the existing pressure switch and disconnect wiring, labeling each terminal.

Step 3: Remove the old switch from the piping or mounting port.

Step 4: Install the new switch using proper thread sealant.

Step 5: Reconnect electrical wires according to the wiring diagram.

Step 6: Restore pressure and power, then test cut-in/cut-out for proper operation.