Facebook Pixel

Marvair 70342 N/O Low-Pressure Switch 40 PSI Off 60 PSI On

Special Price $43.43 Regular Price $56.46
In stock
SKU
70342
The Marvair 70342 low-pressure switch is high quality and is intended for use in HVAC systems. It has a 40 PSI OFF and 60 PSI ON pressure range, the system in optimal operating conditions by cycling the system on or off automatically according to the pressure levels. The switch is normally open, so the circuit is open til the pressure reache the desired threshold. It is mainly used to protect the compressors from running in low-pressure conditions and prevent damage caused by low pressure. They provide energy efficiency reliability, and system longevity reductions by eliminating the need for manual intervention.
https://www.partshnc.com/media/catalog/product/7/0/70342.jpg

Specifications

  • Type: Low-Pressure Switch
  • Pressure Range: 40 PSI Off/60 PSI On
  • Switch Type: Normally Open
Manufacturer Name: Marvair
Product Number: 70342
OEM Part Number: 70342
Product Description: 40#-Off 60#-On N/O Low Pres Sw
Weight:0.15lbs/68.04g

Choose the best HVAC equipment parts and supplies from PartsHnC!

  • Same Day Shipping

  • Best Quality And Best Price

  • Wide Range of Inventory

  • Best Customer Service

Have More Questions or Need Help to Place The Order?
Reach us at (866)773-0907 or [email protected]

Write Your Own Review
You're reviewing:Marvair 70342 N/O Low-Pressure Switch 40 PSI Off 60 PSI On
Your Rating
Customer Questions
What maintenance is required for the Marvair 70342 Low-Pressure Switch?

Periodic inspection and calibration ensure accurate switching and system protection. Check wiring, terminals, and clean contacts, prevent corrosion and moisture ingress. Isolate power before servicing and verify pressure settings for safe operation.

What are common issues with the Marvair 70342 Low-Pressure Switch?

  • Incorrect pressure switching or failure to actuate.
  • Electrical contact wear or arcing.
  • Loose wiring or terminal connections.
  • Corrosion affecting sensor response.
  • Calibration drift causing inaccurate pressure control.
  • Intermittent switching due to vibration or pressure spikes.

Installation Steps

Step 1: Turn off power and isolate the HVAC system to ensure no pressure or electrical hazards.

Step 2: Locate the existing low-pressure switch near the refrigerant line or control panel.

Step 3: Label and disconnect wiring and pressure sensing tubing carefully.

Step 4: Remove the old switch from its mounting or port fitting.

Step 5: Install the new switch using proper thread sealant if required.

Step 6: Reconnect tubing and wiring securely, restore power, and test system cut-in/cut-out operation for proper cycling.